HP Integrity Superdome 2 User Service Guide

IOX enclosure rear
DescriptionNameItem
Indicates the status of the Xbar Fabric
link.
Link Cable Status LEDs1
Solid green = Link OK, transmitting at
full bandwidth
Alternating green/yellow = Link in
service, safe to remove.
Flashing yellow = Deconfigured link,
safe to remove.
CAUTION: Always use the HR user
interface stop link command before
disconnecting the Superdome 2
crossbar fabric cable. The stop link
command will allow safe servicing and
set the LED endpoints for easy location.
After servicing, the HR start link
command will enable re-use of the link.
See following table.CAMNet port 12
LED indicates status:Power supply 13
Green = OK
Off = No ac or failed
LED indicates status:Power supply 24
Green = OK
Off = No ac or failed
See following table.CAMNet port 25
I/O bay 2 PCIe slots6
I/O bay 1 PCIe slots7
Troubleshooting tools 63