HP Release sets for HP Superdome 2 servers

HP
Superdo
me 2 IO
firmware
update
package
(bundles
several
IO EFI
and FW
drivers
for the
SD2
system)
IO bundle version:
2012.10
Includes:
- SAS IO firmware:
5.12
- Qlogic FC Controller
firmware: 5.03.15
- EFI driver for
BRCM57711E based
NIC/LOM
(Broadcom 10 Gb
Ethernet Driver) :
5.2.58
- EFI driver for PCIe
based Gigabit
Ethernet : 4.3.01
- EFI driver and FW
for Emulex PCIe 8 Gb
FC: 4.01a5
- Ethernet and CNA
cards: 3.104.356.3
IO bundle version:
2012.12(a)
Includes:
- SAS IO firmware:
5.78
- Qlogic FC Controller
firmware: 5.03.15
- EFI driver for
BRCM57711E based
NIC/LOM
(Broadcom 10 Gb
Ethernet Driver) :
5.2.58
- EFI driver for PCIe
based Gigabit
Ethernet : 4.3.01
- EFI driver and FW
for Emulex PCIe 8 Gb
FC: 4.01a5 (UBC
5.03A15)
- Ethernet and CNA
cards: 4.1.450.14
IO bundle version:
2013.04
Includes:
- SAS IO firmware:
6.22
- Qlogic FC Controller
firmware: 5.03.15
- EFI driver for
BRCM57711E based
NIC/LOM
(Broadcom 10 Gb
Ethernet Driver) :
5.2.59
- EFI driver for PCIe
based Gigabit Ethernet
: 4.3.01
- EFI driver and FW for
Emulex PCIe 8 Gb FC:
4.01a5 (UBC 5.03A15)
- Ethernet and CNA
cards: 4.1.450.14
IO bundle version:
2013.08
Includes:
- SAS IO firmware:
6.22
- Qlogic FC Controller
firmware: 5.03.15
- EFI driver for
BRCM57711E based
NIC/LOM
(Broadcom 10 Gb
Ethernet Driver) :
5.2.59
- EFI driver for PCIe
based Gigabit Ethernet
: 4.3.01
- EFI driver and FW for
Emulex PCIe 8 Gb FC:
4.01a5 (UBC 5.03A15)
- Ethernet and CNA
cards: 4.1.450.14
- Emulex LOM SD2
5.2.59
Add on
IO
HP
Superdo
me IO
Networking:
» PCIe 2 or 4-port
1GbE card (AD337A,
AD338A, AD339A):
EFI 4.3.01
» PCIe 10 GbE
SR/LR/CR
(AM225A/AM232A/A
M233A): EFI 5.2.58
(includes FW 6.2.21)
» Embedded IO: EFI
5.02.58 / FW 6.2.21
» PCIe 2-port
NC552SFP 10 GbE
(AT118A): EFI
3.104.356.3
FCoE:
» PCIe 2-port
CN1100E CNA
(AT111A): FW
3.704.356.3 (includes
EFI FCoE 5.01.19)
Smart Array:
» P411/256MB
(AM311A) EFI
Version: 5.06b0,
5.16b0
» P812/1GB
(AM312A) EFI
Version: 5.06b0,
5.16b0
Fibre Channel
Note: The versions
below are also
available in the IO
components for HP
SUM 5.3.0 or later
posted on the
Superdome 2
download page.
Infiniband firmware
flash 2012.08.22
Emulex firmware
flash 2012.10.03
Qlogic firmware flash
2012.09.06
Add-in Smart Array
firmware flash
2012.09.06
Intel and Broadcom
firmware flash
2012.09.06(a)
Networking:
» PCIe 2 or 4-port
1GbE card (AD337A,
AD338A, AD339A):
EFI 4.3.01
» PCIe 10 GbE
SR/LR/CR
(AM225A/AM232A/A
M233A): EFI 5.2.58
(Boot Code 6.2.21)
5.2.59
» Embedded IO: EFI
Note: The versions
below are also
available in the IO
components for HP
SUM 5.3.0 or later
posted on the
Superdome 2
download page.
Infiniband firmware
flash 2012.11.30
Emulex firmware flash
2013.02.18
Qlogic firmware flash
2012.11.30
Add-in Smart Array
firmware flash
2013.02.18
Intel and Broadcom
firmware flash
2012.11.30(b)
Networking:
» PCIe 2 or 4-port
1GbE card (AD337A,
AD338A, AD339A):
EFI 4.3.01
» PCIe 10 GbE
SR/LR/CR
(AM225A/AM232A/A
M233A): EFI 5.2.58
(Boot Code 6.2.21)
5.2.59 (Boot Code
6.2.25)
Note: The versions
below are also
available in the IO
components for HP
SUM 5.3.0 or later
posted on the
Superdome 2
download page.
Infiniband firmware
flash 2012.11.30
Emulex firmware flash
2013.05.02
Qlogic firmware flash
2012.11.30
Add-in Smart Array
firmware flash
2013.02.18
Intel and Broadcom
firmware flash
2012.11.30(c)
EFI install, for Intel and
Broadcom devices if
IEXGBE-DRV version
is less than
B.11.31.1303
Broadcom Integrity
firmware flash
2012.06.05 an LOM
5.2.59 – HP-UX install,
for Broadcom devices
if IEXGBE-DRV
version is