HP Servers running HP-UX - getsysinfo.sh 9.22 data collection script readme and FAQ

What is collected ?
The /tmp/sysinfo.[shar|tgz|uu] file contains the following Files:
bdf_swapinfo.txt Output of bdf and swapinfo -tam
bootconf.txt lvlnboot -v, lifls of bootdisks, AUTO file(s), setboot, ll /stand/vmunix/*
ccerrlog GSP Chassis codes (from /var/stm/logs/os, binary file, only PA-Risc Servers)
config general information (uname, model, etc.)
kernelconf.txt kernel configuration
config.lvm LVM relevant info (lvmtab, fstab, vgdisplay & lvlnboot -v (not with -s))
crash.txt information about crash config and /var/adm/crash directory
crashinfo.crash.X.html
Wiith option -c, if /opt/sfm/tools/crashinfo* is present, and a dump is in /var/adm/crash, the dump is
analyzed with crashinfo -H -c
cstm.info STM information logout from all devices.
cprop.txt output of System Management Homepage related information (cprop -details -a)
diagdata.tar Information needed for diag software troubleshooting (only with -diag option)
diaginfo.txt Several diagnostic related information. ll -R /var/stm /var/psb /var/opt/sfm /var/opt/resmon.
diskinfo.txt output of diskinfo -v of all disks (only with -d)
dmesg.txt Dmesg
event.log* /var/opt/resmon/log/event.log* files younger than 90 days
[fcd|fclp|
fcoc]diag_date.txt.gz
-san: Output of fclpdiag or fcddiag or fcocdiag if fibre channel cards exist for this driver
fcmsutil.out nice grep output from fcmsutil (Fibre Channel Infos)+ tdlist + fcdlist
fpl.log.?? Chassis Error Log Files on newer systems (from /var/stm/logs/os, younger than 90 days)
getsysinfo.log log of STDOUT and STDERR of the getsysinfo.sh run
hpvmconsole.vmname.log Console log of virtual machines captured on the VSP – not if -s is set
hpvmstatus.txt information about HP virtual machines (and vpars >=6.0)
icod.txt
icod.log
output of icod_stat, icod_stat -s (ver≥6) or icod_stat -u (<6)
ioscan.txt
ioscan -fn (-s: ioscan -fnk).
For HPUX 11.31:ioscan -fN and also ioscan -m dsf, ioscan -m lun , ioscan -m hwpath.
For Superdome 2: ioscan -m resourcepath
ioscan_fnk.txt only for HPUX 11.31: output of ioscan -fnk while ioscan.txt contains output of ioscan -fN
irdiag.out output of irdiag-v for Raid4Si cards
lanconfig
lanscan, nwmgr, lanadmin, netstat outputs and netconf
with -net: additional files for hp_apa config
lastlogs.raw current raw logfile from the online diagnostics (has to be decoded with logtool/stm)
machinfo.txt output of machinfo (IA64 system information)
memlog.txt Memory error log file (output of logtool commands vd and vda)
mpt.out U320 SCSI interfaces: output of mptutil and mptconfig
nettl.txt output of netfmt -f /var/adm/nettl.LOG000 (only with -net option)
olar.txt Output of rad -q or olrad -q
oselogs.tgz raw 11.31 diagnostic logfiles from /var/opt/psb/oselogs
partition.txt parstatus, parstatus -c CELL -V, vparstatus, vparstatus -v, vparstatus -e
ps_top.txt output of ps -ef and top
rc.log
rc.log.old
current and last boot logfile (/etc/rc.log)