HP Servers running HP-UX - getsysinfo.sh 9.22 data collection script readme and FAQ

rst.log RST event.log file /var/opt/resmon/log/rst.log
sas.txt
sasdiag like information about SAS disks and cards connected to LSI SAS HBAs
(improved own script)
sautil.txt information about Smartarray raid controllers
service_guard.txt cmclview -v output (if Service Guard cmcld is running)
sfmconfig.txt output of sfmconfig -w -q (system fault manager config)
sfm_event.log /var/opt/sfm/log/event.log
sfmlog.txt system fault manager logs similar to EMS event.log
shutdownlog /etc/shutdownlog
spmgr.out EVA diskarray infos
sw_inventory.xml used by mission critical HP support for patch analysis
swlist.txt output of swlist -l bundle, swlist -l product and swlist -l fileset -a state | grep inst
syslog.log
OLDsyslog.log
(last 2048 MB each) use –f option to capture the complete files
system.krs
krs information from /stand/krs/system.krs
contains f.e. SAS dynamic hardware path assignments.
(only collected if SAS is used)
tddiag_date.txt.gz -san: Output of tddiag if fibre channel cards exist for this driver
tombstones Directory with tombstone files (HPMC or MCA). Also: crashinfo outputs and EFI binary MCA files.
tombstones/sfm_sal Directory with binary CPEs and CMCs from logExtract (comes with SysFltMgr)
vmunix.nm.gz
gzipped output of nm /stand/vmunix. Needed for software support for extended analysis of MCAs
when no creash dump is written.
vxvm.txt Information about Veritas Volumemanager (VXVM) config
xpinfo.out output of xpinfo (for XP diskarrays)
How to capture additional data from an MP or OA with hpmpl.jar ?
At least java 1.5 is needed for this feature. If you do not have getsysinfo.mp.sh or getsysinfo.all.sh
(which have the hpmpl tool embedded), the hpmpl.285.jar file needs to be in the same directory as
getsysinfo.sh.
Note: getsysinfo.sh is trying to guess the MP IP or OA address with the cprop utility. If successful,
it will connect automatically to this IP.
getsysinfo.sh -mp #getsysinfo will ask for login data to MP or OA
getsysinfo.sh -mp -mpopt “-ssh” #access MP via ssh (default for i2, i4 server)
getsysinfo.sh -mp -mpopt “-h hostname -u user -p password”
IMPORTANT: hpmpl will ask for login and password to MP or OA during the getsysinfo.sh run !!!
Note: hpmpl also supports capturing logs via the Onboard Administrator (OA) of C-Class Blade
enclosures and Superdome 2 Servers.
It will automatically (if no -mpopt option is set) detect if an enclosure is present and by default
connect via ssh to the OA instead of the iLO. For i2 and i4 blades, it will then try capturing the MP
logs from the Onboard Administrator.
Enhanced example (give OA IP and login when hpmpl asks):
getsysinfo.sh -mp -mpopt “-ssh -oamp ” #capture OA+ ilO-MP data from blades and C7000 OA via ssh
without -oamp, only “show all” is captured.
To capture only MP logs data from blades in bays 1 and 2 via the OA: