nPartition Administrator's Guide, Second Edition

2. At the EFI Boot Manager menu, select the Boot Option Maintenance option.
3. At the Boot Option Maintenance menu, select the Boot from a File menu option and then
select the network card whose MAC address you want to use when booting.
Highlight the desired network card, then press Return or Enter to initiate booting using
the selected card.
EFI Boot Maintenance Manager ver 1.10 [14.60]
Boot From a File. Select a Volume
IA64_EFI [Acpi(000222F0,269)/Pci(0|0)/Scsi(Pun8,Lun0)/HD(Part1,S
Removable Media Boot [Acpi(000222F0,2A8)/Pci(0|1)/Scsi(Pun2,Lun0
Load File [Acpi(000222F0,200)/Pci(1|0)/Mac(001083FD5D9B)]
Load File [EFI Shell [Built-in]]
Exit
4. Exit the console and service processor interfaces if finished using them.
To exit the EFI environment type ^B (Control-B); this exits the nPartition console and returns
to the service processor Main Menu. To exit the service processor, type X at the Main Menu.
Procedure 5-49 Booting over a Network (EFI Shell)
From the EFI Shell environment, use the lanboot select command to boot over a network.
The EFI Shell is available only on HP Integrity systems.
NOTE: To perform a directed lanboot on HP Integrity servers, use the EFI Shell dbprofile
command and the lanboot command -dn option.
First use the dbprofile EFI Shell command to list or create direct boot profiles. Then use the
lanboot select -dn profile command to perform a directed lanboot using the specified
direct boot profile (profile).
For details use the help dbprofile command and the help lanboot command from the
EFI Shell.
1. Access the EFI Shell environment for the nPartition that you want to boot over a network.
Login to the service processor (MP or GSP) and enter CO to access the Console list. Select
the nPartition console.
When accessing the console, confirm that you are at the EFI Boot Manager menu (the main
EFI menu). If at another EFI menu, select the Exit option from the sub-menus until you
return to the screen with the EFI Boot Manager heading.
From the EFI Boot Manager menu, select the EFI Shell menu option to access the EFI Shell
environment.
2. At the EFI Shell, issue the lanboot select command to boot from the selected networking
card.
For details see the help lanboot command.
Shell> lanboot select
01 Acpi(000222F0,0)/Pci(1|0)/Mac(00306E0E5268)
02 Acpi(000222F0,800)/Pci(1|0)/Mac(00108327549F)
Select Desired LAN: 1
Selected Acpi(000222F0,0)/Pci(1|0)/Mac(00306E0E5268)
Running LoadFile()
CLIENT MAC ADDR: 00 30 6e 0e 52 68
148 Booting and Resetting nPartitions