nPartition Administrator's Guide, Second Edition

As needed, an absolute CLM specification is rounded up to the nearest 0.5 GBytes.
If the clm value is rounded, the command reports the final value used. For details, refer
to the parmodify(1M) manpage.
4. Reboot the nPartition to use the cells' new attribute values.
On cell-based servers based on the HP sx1000 chipset or HP sx2000 chipset, if you have
changed cell local memory (CLM) values then you must reboot the nPartition whose CLM
values have changed (HP-UX: shutdown -r; Windows: shutdown /r; Linux: shutdown
-r time; OpenVMS: @SYS$SYSTEM:SHUTDOWN with an automatic system reboot). If you
also are changing use-on-next-boot values then also use the following guidelines.
If you have changed any cell use-on-next-boot settings for the nPartition then reboot the
nPartition in either of two ways:
• Perform a standard reboot (HP-UX: shutdown -r; Windows: shutdown /r; Linux:
shutdown -r time; OpenVMS: @SYS$SYSTEM:SHUTDOWN with an automatic system
reboot).
If you have only changed use-on-next-boot values from y to n, then perform a reboot.
Any cells set to not be used will still be assigned to the nPartition but will not be used
(will not rendezvous) in the nPartition.
• Perform a reboot for reconfig (HP-UX: shutdown -R; Windows: shutdown /r; Linux:
shutdown -r time; OpenVMS: @SYS$SYSTEM:SHUTDOWN with an automatic system
reboot).
If you have changed any use-on-next-boot values from n (do not use on next boot) to
y (use the cell on next boot), then you must perform a reboot for reconfig to allow the
currently inactive cells to reboot and rendezvous when the nPartition reboots.
Procedure 6-19 Setting Cell Attributes (Partition Manager)
You can set cell attributes by using Partition Manager.
When using Partition Manager Version 1.0, select the nPartition to which the cell belongs, select
the Partition→Modify Partition action, Change Cell Attributes tab, select the cell(s), and click
Modify Cell(s).
When using Partition Manager Version 2.0, select the nPartition to which the cell belongs, select
the nPartition→Modify nPartition action, and then configure attributes using the Set Cell
Options tab and the Configure Memory tab.
1. Access Partition Manager.
For details on accessing Partition Manager or other tools, see “Tools for Configuring
nPartitions” (page 165).
2. Select the nPartition whose cell attribute values you want to modify.
3. Initiate the nPartition modify action.
If using Partition Manager Version 1.0, the Partition→Modify Partition action.
If using Partition Manager Version 2.0, select the nPartition→Modify nPartition action.
4. Access the Partition Manager section(s) for configuring cell attributes.
From Partition Manager Version 1.0, select the Change Cell Attributes tab, then select the
cell and click the Modify Cell button. This enables you to configure the use-on-next-boot
value for the selected cell.
Setting Cell Attributes 193