nPartition Administrator's Guide, Second Edition

3. Exit the console and service processor interfaces if finished using them.
To exit the EFI environment type ^B (Control-B); this exits the nPartition console and returns
to the service processor Main Menu. To exit the service processor, type X at the Main Menu.
Procedure 6-22 Setting Core Cell Choices (nPartition Commands)
From the command line, use the parmodify command to configure the core cell choices for an
nPartition. You also can use the parstatus -V -p# command to list the core cell choices for
an nPartition (-p# where # is the nPartition number).
NOTE: You can remotely perform this task using remote administration options supported by
the Enhanced nPartition Commands or Partition Manager Version 2.0. Remote administration
is supported by the Partition Manager Tools→Switch Complexes action and by the nPartition
command -u... -h... options or -g... -h... options.
For details see “Tools for Configuring nPartitions” (page 165).
1. Login to a system with the nPartition commands installed.
If using remote administration features to set core cell choices, you can login to any system
with Enhanced nPartition Commands installed.
2. Issue the parstatus -V -p# command to list the current core cell choices and core cell
use for an nPartition.
The parstatus -V -p# command list detailed status for the specified nPartition (-p#
where # is the nPartition number).
The nPartition status includes the current active core cell ("Core Cell"), and any core cell
choice settings.
The core cell choice preferences are listed by parstatus as the "Core Cell Alternate" settings
with "1" being the highest priority and "2" through "4" as the lower priority core cell choices.
# parstatus -V -p0
[Partition]
Partition Number : 0
Partition Name : jules00
Status : active
IP address : 0.0.0.0
Primary Boot Path : 0/0/2/0/0.13.0
Alternate Boot Path : 0/0/2/0/0.0.0
HA Alternate Boot Path : 0/0/2/0/0.14.0
PDC Revision : 6.0
IODCH Version : 23664
CPU Speed : 552 MHz
Core Cell : cab0,cell0
Core Cell Alternate [1]: cab0,cell0
Core Cell Alternate [2]: cab0,cell2
....
Core Connected Par
Hardware Location Usage IO To Num
=================== ============ ==== ========== ===
cab0,bay0,chassis1 active yes cab0,cell0 0
cab0,bay1,chassis3 active yes cab0,cell2 0
#
196 Creating and Configuring nPartitions