nPartition Administrator's Guide, Second Edition
Table 8-1 Hardware and nPartition Status Task Summaries (continued)
SummaryTask
• Service Processor (MP or GSP): PS command and B option to list cabinet details for
the desired cabinet.
• nPartition Commands: parstatus -B command for summaries about all cabinets,
or the parstatus -V -b# command for detailed status for the specified cabinet (-b#
where # is the cabinet number).
• Partition Manager:
— Version 1.0 — Details→Show Complex Details action, Cabinet Info tab.
— Version 2.0 — Hardware tab for an overview of cabinets in the complex.
Complex→Show Complex Details for complete details about all hardware in the
complex.
See “Listing Cabinets in a Server Complex” (page 234).
“Listing Cabinets in a
Server Complex”
• Service Processor (MP or GSP): ID command.
• BCH Menu: Information menu, CID command.
• nPartition Commands: parstatus -X command.
• Partition Manager:
— Version 1.0 — Complex→Show Complex Details, General tab.
— Version 2.0 — General tab.
See “Listing Product and Serial Numbers” (page 235).
“Listing Product and
Serial Numbers”
• Service Processor (MP or GSP): CP command.
• nPartition Commands: parstatus -P command, or the parstatus -V -p#
command for details about specific nPartition (-p# where # is the nPartition number)
• Partition Manager:
— Version 1.0 — View the left side of the primary window to see a display of all
nPartitions in the server; for details select an nPartition and the Details→Show
Complex Details action.
— Version 2.0 — nPartitions tab.
See “Listing nPartition Configurations” (page 236).
“Listing nPartition
Configurations”
• BCH Menu: Configuration menu, PD command.
• EFI Shell: info sys command.
• nPartition Commands: parstatus -w command.
See “Listing the Local nPartition Number” (page 237).
“Listing the Local
nPartition Number”
Task Summaries for nPartition and Hardware Status 225