nPartition Administrator's Guide, Second Edition

2. Issue the parstatus -C command to list details about the cells installed in the server
complex and their nPartition assignments.
Procedure 8-3 Listing Cell Configurations (Partition Manager)
From Partition Manager, select the Cells tab to list cell configuration details.
When using Partition Manager Version 1.0, first select the Details→Show Complex Details
action, then select the Cells tab.
1. Access Partition Manager.
For details on accessing Partition Manager or other tools, see “Tools for Listing Status”
(page 223).
2. Use the Cells tab to list cell configurations, including details about which cell are installed
in the server and any cell nPartition assignments.
From Partition Manager Version 1.0, select the Details→Show Complex Details action,
then select the Cells tab.
From Partition Manager Version 2.0, select the Cells tab to list these details.
3. Exit Partition Manager.
From Partition Manager Version 1.0, select the File→Exit action.
From Partition Manager Version 2.0, select Log off parmgr or exit the Web browser when
finished.
Listing Processor Configurations
You can list processor configurations by using any one of the following procedures:
• “Listing Processor Configurations (Service Processor)” (page 227)
• “Listing Processor Configurations (BCH Menu)” (page 227)
• “Listing Processor Configurations (EFI Shell)” (page 228)
• “Listing Processor Configurations (nPartition Commands)” (page 228)
• “Listing Processor Configurations (Partition Manager)” (page 229)
Processor (CPU) configuration details include the CPU population, CPU type, and the clock
speed.
Procedure 8-4 Listing Processor Configurations (Service Processor)
From the service processor Command Menu, use the PS command to list details about the cell
whose processor configuration you want to view.
1. Login to the service processor (MP or GSP) and enter CM to access the Command Menu.
2. At the Command Menu, enter the PS command, select the C option, and specify the cell
whose processor configuration you want to view.
3. To exit the service processor Command Menu, enter MA to return to the service processor
Main Menu.
At the Main Menu, enter X to exit the service processor interface.
Procedure 8-5 Listing Processor Configurations (BCH Menu)
From the BCH Information Menu use the PR command to list processor details for the local
nPartition. The BCH Menu is available only on HP 9000 systems.
Listing Processor Configurations 227