nPartition Administrator's Guide, Second Edition

1. Access the BCH Main Menu for the nPartition whose processor configuration you want to
list.
Login to the service processor (MP or GSP) and enter CO to access the Console list. Select
the nPartition console. When accessing the console, confirm that you are at the BCH Main
Menu (the Main Menu: Enter command or menu> prompt). If at a BCH menu other
than the Main Menu, then enter MA to return to the BCH Main Menu.
2. Enter IN to access the BCH Information Menu.
3. Enter the PR command to list processor information for all active cells in the local nPartition.
4. Exit the console and service processor interfaces if finished using them.
To exit the BCH environment type ^B (Control-B); this exits the nPartition console and
returns to the service processor Main Menu. To exit the service processor, type X at the Main
Menu.
Procedure 8-6 Listing Processor Configurations (EFI Shell)
From the EFI Shell environment, use the info cpu command to list processor details for the
local nPartition. The EFI Shell is available only on HP Integrity systems.
1. Access the EFI Shell environment for the nPartition whose processor configuration you want
to list.
Login to the service processor (MP or GSP) and enter CO to access the Console list. Select
the nPartition console.
When accessing the console, confirm that you are at the EFI Boot Manager menu (the main
EFI menu). If at another EFI menu, select the Exit option from the sub-menus until you
return to the screen with the EFI Boot Manager heading.
From the EFI Boot Manager menu, select the EFI Shell menu option to access the EFI Shell
environment.
2. Enter the info cpu command to list processor details for all active cells in the local
nPartition.
3. Exit the console and service processor interfaces if finished using them.
To exit the EFI environment type ^B (Control-B); this exits the nPartition console and returns
to the service processor Main Menu. To exit the service processor, type X at the Main Menu.
Procedure 8-7 Listing Processor Configurations (nPartition Commands)
From the command line, use parstatus -C for processor summaries for all cells in the server
complex; or use parstatus -V -c# for detailed processor information for the specified cell
(-c# where # is the cell number). Use the HP-UX ioscan -C processor command or the
HP-UX B.11.23 and HP-UX B.11.31 mpsched -s command for processor information about the
local nPartition.
1. Login to a system with the nPartition commands installed.
If using remote administration features to list processor configurations, you can login to any
system with Enhanced nPartition Commands installed.
2. Issue the command to list processor details.
• parstatus -C — Cell and processor summaries for all cells in the server complex.
• parstatus -V -c# — Detailed processor information for the specified cell (-c# where
# is the cell number).
• ioscan -C processor — HP-UX only. Processor HP-UX Hardware Paths for all
configured processors in all active cells in the local nPartition.
• mpsched -s — HP-UX B.11.23 and HP-UX B.11.31. Processor and "locality domain"
summary for all configured processors in all active cells in the local nPartition.
228 Listing nPartition and Hardware Status