nPartition Administrator's Guide, Second Edition

Table A-1 Cell IDs in Global Cell Number Format (continued)
————3210Global Format for
rp8400, rp8420, rp8440,
rx8620, and rx8640
76543210Superdome Cabinet 0
Global Format
15141312111098Superdome Cabinet 1
Global Format
• Cell Hardware Location Format In cell hardware location format, each cell is identified
using two numbers that specify the cabinet and the cell slot with the cabinet where the cell
resides: cabinet/slot.
Table A-2 Cell IDs in Hardware Location Format
76543210Cell Slot
——————0/10/0Hardware Location
Format for
rp7405/rp7410, rp7420,
rp7440, rx7620, and
rx7640
————0/30/20/10/0Hardware Location
Format for rp8400,
rp8420, rp8440, rx8620,
and rx8640
0/70/60/50/40/30/20/10/0Superdome Cabinet 0
Hardware Location
Format
1/71/61/51/41/31/21/11/0Superdome Cabinet 1
Hardware Location
Format
Both cell ID formats specify the location of a cell in a complex. For example, parstatus -c9
and parstatus -c1/1 specify the same cell.
# parstatus -c9
[Cell]
CPU Memory Use
OK/ (GB) Core On
Hardware Actual Deconf/ OK/ Cell Next Par
Location Usage Max Deconf Connected To Capable Boot Num
========== ============ ======= ========= =================== ======= ==== ===
cab1,cell1 active base 4/0/4 8.2/ 0.0 - no yes 1
# parstatus -c1/1
[Cell]
CPU Memory Use
OK/ (GB) Core On
Hardware Actual Deconf/ OK/ Cell Next Par
Location Usage Max Deconf Connected To Capable Boot Num
========== ============ ======= ========= =================== ======= ==== ===
cab1,cell1 active base 4/0/4 8.2/ 0.0 - no yes 1
#
I/O Specification Format
Use the following I/O hardware location format when specifying an I/O chassis to the nPartition
configuration commands:
cabinet/bay/chassis
244 nPartition Commands