nPartition Administrator's Guide, Second Edition

-A
This option differs slightly for the Original nPartition
Commands and Enhanced nPartition Commands releases.
For the Original nPartition Commands release, -A unlocks
the Stable Complex Configuration Data and the Partition
Configuration Data of all the nPartitions in the complex.
For the Enhanced nPartition Commands release, -A
unlocks the Complex Configuration Data, the Dynamic
Complex Configuration Data, and the Partition
Configuration Data of all the nPartitions in the target
complex.
-u username
Enhanced nPartition Commands only. Specifies the account
and authorization to access an nPartition other than the local
nPartition.
The -h option is required if this option is used.
username specifies a configured user name on the target
nPartition.
-g
Enhanced nPartition Commands only. Allows access to the
complex specified by the -h option. The accessed complex is
then considered the target complex. Access is through the
service processor LAN port.The -h option is required if this
option is used.
-h IPaddress|hostname
Enhanced nPartition Commands only. This option is only used
in combination with either the -u or -g option.
IPaddress|hostname specifies the IP address or hostname of the
target nPartition (-u) or service processor (-g).
parunlock Command 261