nPartition Administrator's Guide, Second Edition

-f
Power off the specified cells or I/O chassis.
-c cell
The specified cell is powered on/off or the power status is
displayed.
A cell can be specified either in the local (cabinet/slot) or global
(cell_ID) format.
-i IOchassis
The specified IOchassis is powered on/off or the power status
is displayed.
-C
Display power status of all cells. By default the scope is the
entire complex if the -l option is not specified.
-I
Display power status of all I/O chassis. The scope is the entire
complex if the -l option is not specified.
-l cabinet
Limit the scope of the -C or -I option to the specified cabinet.
-u username
Enhanced nPartition Commands only. Specifies the account
and authorization to access an nPartition other than the local
nPartition.
The -h option is required if this option is used.
username specifies a configured user name on the target
nPartition.
-g
Enhanced nPartition Commands only. Allows access to the
complex specified by the -h option. The accessed complex is
then considered the target complex. Access is through the
service processor LAN port.The -h option is required if this
option is used.
-h IPaddress|hostname
Enhanced nPartition Commands only. This option is only used
in combination with either the -u or -g option.
IPaddress|hostname specifies the IP address or hostname of the
target nPartition (-u) or service processor (-g).
frupower Command 265