HP Superdome 2 Partitioning Administrator Guide (5900-2540, December 2012)

Table 12 RunStates of an active Virtual Partition (continued)
DescriptionState
This run-state is displayed while a shutdown/reboot of a virtual partition is being processed.DEACTIVATING
This run-state is displayed while a reset of a virtual partition is being processed.RESETTING
An MCA occurred in the virtual partition and is being processed.MCA
This run-state is displayed when an INIT of a virtual partition is being processed.INIT
The virtual partition in an unknown (error) run-state.UNKNOWN
vparstatus: Summary Information
The vparstatus command provides information about vPars and vPar assignable resources. For
the vparcreate and vparmodify commands, when invoked from the OA, you must use the –N
option to indicate which nPartition is to be considered. (The virtual partition commands work on
only one nPartition at a time.) This information is also displayed on the vPar Summary tab containing
nPartition's page in the OA GUI.
Examples
The following are some examples of displaying the vparstatus summary information:
• To display a summary format of all the resources in virtual partition 1:1
vparstatus -p 1 -N 1
[Virtual Partition]
Num Name RunState State
=== ========================== ============ =========
1 vPar0001 DOWN Inactive
[Virtual Partition Resource Summary]
Virtual Partition CPU Num Num Granularity Total MB
Num Name Min/Max CPUs IO ILM SLM ILM SLM
=== ========================== ======= ==== ==== ===== ===== ====== ======
1 vPar0001 0/ 8 6 1 1024 1024 4096 0
• To display the detailed attributes and resources of vpar1 in nPartition 1. This information is
also displayed on the Status tab of the vPar page in the OA GUI.
vparstatus -v -p 1:1
[Virtual Partition Details]
Number: 1
Name: vPar0001
RunState: UP
State: Active
[CPU Details]
Min/Max: 0/64
User assigned [Path]:
Boot processor [Path]: 1/1/0/0
System assigned [Path]: 1/1/0/0
1/1/0/1
1/1/0/2
Non-socket-specific:
User assigned [Count]: 0
System assigned [Count]: 3
Socket-specific [Count]: Socket-ID/Count
<none>
[IO Details]
[Root Port] [Slot]
10/1/0/2/0 10/1/1
[Memory Details]
ILM Total (MB): 8192
ILM Granularity (MB): 512
Commands: Displaying vPars Resource Information (vparstatus) 101