HP-UX Virtual Partitions Administrator's Guide (includes A.03.05 and A.04.05)

A LBA Hardware Path to Physical I/O Slot Correspondence
(PA-RISC only)
This section contains a simplified PCI I/O block diagrams for the rp5470/L3000, rp7400/N4000,
rp7405/rp7410, rp8400, and HP 9000 Superdome (SD16000, SD32000, SD64000) servers. These
diagrams can be used to help determine which LBAs correspond to which physical I/O slots.
The diagrams presented here were created due to incorrect or inaccessible PA-RISC
documentation. For other supported servers, see your server manual.
NOTE: Note that there is a hardware path change when upgrading from PCI to PCI-X. For
more information, see the hardware manuals and “Upgrading Backplanes from PCI to PCI-X ”
(page 111).
rp5470/L3000 I/O Block Diagram
Figure A-1 rp5470/L3000 I/O Hardware Paths
LBA 12
LBA 10
Slot 12 Path 0/10
LBA 8
LBA 9
LBA 3
LBA 1
LBA 4
LBA 0
LBA 5
LBA 2
Slot 11 Path 0/12
Slot 10 Path 0/8
Slot 9 Path 0/9
Slot 8 Path 0/3
Slot 7 Path 0/1
Slot 6 Path 0/5
Slot 5 Path 0/2
Slot 4 Path 0/4
Slot 4 Path 0/4
Slot 2
Console
0/0/4/0.0
GSP/
Console
UPS
0/0/4/0.1
GSP LAN
0/0/5/0
SCSI
0/0/1/x.x
0/0/2/x.x
LAN
0/0/0/0
Slot 1
SBA 0
Hot Plug PCI I/O Slots 5-12
rp5470 / L3000 I/O Block Diagram
LAN
10/100BT
SCSI - 2x dual
LVD
rp5470/L3000 I/O Block Diagram 299