HP iPAQ 200 Series Enterprise Handheld - Product Guide

Create, end, and accept a Bluetooth partnership
You can exchange information between your HP iPAQ and another device that has Bluetooth
capabilities. For this, you will have to first create a Bluetooth partnership between the two devices.
NOTE: To exchange information between two Bluetooth enabled devices, make sure Bluetooth is
turned on both devices. The devices need not be in the discoverable mode.
1. Make sure the two devices are turned on, discoverable, and within close range.
2. Tap Start > Settings > Connections > Bluetooth.
3. Tap Bluetooth Manager > New > Explore a Bluetooth Device. Your HP iPAQ searches for other
devices with Bluetooth capabilities and displays them in the list.
4. Tap the name of the other device, and tap Next.
5. In Security, if you want to use a secure, encrypted connection (recommended for enhanced
security), check this box, and tap Next. Otherwise, leave the Security field blank and tap Next.
6. Enter the same passkey on the other device.
7. Tap Finish.
8. To give the partnership a more meaningful name, tap and hold the device name under My
Shortcuts, then tap Rename.
To end a Bluetooth partnership:
1. Tap Start > Settings > Connections > Bluetooth > Bluetooth Manager.
2. Tap and hold the partnership you want to end.
3. Tap Delete.
To accept a Bluetooth partnership:
1. Make sure your device is turned on, discoverable, and within close range.
2. When prompted to accept a partnership with the device that is requesting the relationship, tap
Yes.
3. If a passkey is requested, enter an alphanumeric passkey between 1 and 16 characters in
Passkey
box and tap Next. Enter the same passkey in the device requesting the partnership. Using
a passkey provides greater security.
4. To give the partnership a more meaningful name, change the name of the device in Name.
5. Tap Finish.
If you cannot discover another device, try the following:
●
Make sure Bluetooth is turned on.
●
Move closer to the device.
●
Make sure the device you are attempting to connect to is switched on and is in the discoverable
mode.
Rename a Bluetooth partnership
1. Tap Start > Settings > Connections > Bluetooth.
2. Tap the Browse icon located next to Current profile.
Bluetooth 23