HP iPAQ hw6500 Series Mobile Messenger User's Guide for Asia Pacific and North America

Using Bluetooth 9–13

4. From the Bluetooth Browser screen, select the computer you

want to synchronize with, and tap Next.

5. Under Shortcut creation, create a shortcut name for this

connection, and then tap Finish.

NOTE: If you are setting up the ActiveSync partnership with an Evo

Notebook or Desktop computer, select the name you typed in Step 7 of

“Using the HP Bluetooth Multiport Module for Evo Notebooks and

Desktops.”

Establishing a Serial Connection

Use the wireless Bluetooth serial port connection just as you would a

physical serial cable connection. You must configure the application that

will use the connection to the correct serial port.

To establish a serial connection:

1. From the Today screen, tap the iPAQ Wireless icon >

Bluetooth > Manager.

2. Tap New > Explore a Bluetooth device > Next.

3. Tap the device name as it appears on the screen.

4. Follow the connection wizard instructions.

Dial-Up Networking Service

Use dial-up networking (DUN) to connect to the internet from another

Bluetooth device through your HP iPAQ.

Using Dial-Up Networking Service

NOTE: An activated SIM card must be inserted in your HP iPAQ and the

phone must be turned on before beginning this process.

To connect to a device that provides phone or modem access:

1. You must first pair the two devices. For more information, see the

section on

”Pairing Devices” in this chapter.