HP LaserJet 1020 - User Guide

Changing the printer separation pad
Normal use with good media causes wear. The use of poor media might require more frequent
replacement of the separation pad. If the printer regularly pulls multiple sheets of media at a time, you
might need to change the separation pad. See
Ordering supplies on page 92 to order a new printer
separation pad.
NOTE: Before you change the separation pad, clean the pickup roller. See Cleaning the pickup
roller on page 46.
1. Turn the printer off, and then unplug the power cord from the printer. Wait for the printer to cool.
2. At the back of the printer, unscrew the two screws holding the separation pad in place.
ENWW Changing the printer separation pad 47