- HP Laserjet Enterprise CP4020/CP4520 Manual

Pickup motor
Before proceeding, remove the following components:
●
Formatter. See
Formatter PCA on page 78.
●
Upper-left cover. See
Upper-left cover on page 96.
●
Power-supply cover. See
Power-supply cover on page 98.
●
Left cover. See
Left cover on page 99.
●
Front-top cover. See
Front-top cover on page 100.
●
Rear-top cover. See
Rear-top cover on page 102.
●
Rear cover. See
Rear cover on page 112.
●
Right-rear cover. See
Right-rear cover on page 110.
●
Power-supply fan. See
Power-supply fan on page 152
●
Interconnect board (ICB). See
Interconnect board (ICB) on page 153.
●
Low-voltage power supply. See
Low-voltage power supply (LVPS) on page 157.
Remove the pickup motor
Remove two screws (callout 1), disconnect one connector (callout 2), and then remove the motor (callout
3).
Figure 2-153 Remove the pickup motor
2
1
3
172 Chapter 2 Removal and replacement ENWW