- HP Laserjet Enterprise CP4020/CP4520 Manual

Print Quality menu
To display: Press the Home button
, select the CONFIGURE DEVICE menu, and then select the
PRINT QUALITY menu.
NOTE: Values that have an asterisk (*) are the factory-default values. Some menu items have no
default.
Item Sub-item Sub-item Values Description
ADJUST COLOR HIGHLIGHTS
●
CYAN DENSITY
●
MAGENTA DENSITY
●
YELLOW DENSITY
●
BLACK DENSITY
Range from +5 to
–5. Default is 0.
Adjust the darkness or lightness of
highlights on a printed page. Lower values
represent lighter highlights on a printed
page, and higher values represent darker
highlights on a printed page.
MIDTONES
●
CYAN DENSITY
●
MAGENTA DENSITY
●
YELLOW DENSITY
●
BLACK DENSITY
Range from +5 to
–5. Default is 0.
Adjust the darkness or lightness of
midtones on a printed page. Lower values
represent lighter midtones on a printed
page, and higher values represent darker
midtones on a printed page.
SHADOWS
●
CYAN DENSITY
●
MAGENTA DENSITY
●
YELLOW DENSITY
●
BLACK DENSITY
Range from +5 to
–5. Default is 0.
Adjust the darkness or lightness of
shadows on a printed page. Lower values
represent lighter shadows on a printed
page, and higher values represent darker
shadows on a printed page.
RESTORE COLOR
VALUES
Restore the color settings by resetting the
density values of each color.
SET
REGISTRATION
For each tray, setting the registration shifts
the margin alignment to center the image
on the page from top to bottom and from
left to right. You can also align the image
on the front with the image printed on the
back.
ADJUST TRAY <X> Perform the alignment procedure for each
tray.
When it creates an image, the product
scans across the page from side to side as
the sheet feeds from top to bottom into the
product.
PRINT TEST
PAGE
Print a test page and instructions for
setting the registration of the image
location.
324 Chapter 3 Solve problems ENWW