HP LaserJet P2030 Series - Software Technical Reference

To use Use Different Paper/Covers options, configure the setting for the print job. Each option for the
Use Different Paper/Covers setting is described in the sections that follow this procedure. Use the
following instructions to configure the setting.
Configure the Use Different Paper/Covers options for a print job
For each option, set a different tray by using the Source Is: drop-down menu. For some options, the
Type is: drop-down menu is also available.
1. To use different paper or cover stock, select the Use Different Paper/Covers check box. A list of
options appears in the dialog box. The full set of selections is visible by using the down arrow button
to the right of the list to scroll.
2. To use different media for the pages within the print job, select the appropriate option (Front
Cover, First Page, Other Pages, Last Page, or Back Cover) in the dialog box. A check mark
appears to the left of the option when a setting is changed using the Source is: or Type is: drop-
down menus.
3. Click OK to print.
NOTE: Use the same size of media for the entire print job. All options selected from the available Use
Different Paper/Covers options use the size selected in the First Page settings.
When you change the type and source of the paper and covers, the settings remain configured until you
close the software program.
Each option for the Use Different Paper/Covers setting is described in the following sections.
Front Cover and Back Cover options
Use these options to include a blank or preprinted front cover or back cover on a document.
ENWW Paper/Quality tab features 103
HP print drivers for
Windows