HP LaserJet P2030 Series - Software Technical Reference

Click Close to exit the installer.
Printer setup
After installing the printing-system software in Macintosh operating systems, the printer must be set up.
●
Set up a printer with Mac OS X V10.4
●
Set up a printer with Mac OS X V10.3
●
Troubleshooting the printer setup
Set up a printer with Mac OS X V10.4
Carry out these steps after the software installation is complete.
1. If you are installing the printer using a USB or parallel connection, connect the USB cable or the
parallel cable between the HP LaserJet P2030 Series printer and the computer. Turn on the printer.
If you are installing using a network connection, verify that the network cable is connected to the
printer and the printer is on.
2. In the Applications folder, open the Utilities folder, and then run the Printer Setup Utility. The
Printer List appears.
You can also configure the printer using the Print & Fax pane of System Preferences (from the
Apple menu, choose System Preferences..., then choose Print & Fax).
3. If you are installing the printer using a USB or parallel connection, verify that the printer appears
on the printer list. The Kind column in the printer list should display HP LaserJet P2030 Series.
If this is the case, the setup is complete.
If the printer does not appear, or if the correct information does not appear in the Kind column, see
Troubleshooting the printer setup on page 138.
If you are installing the printer using a network connection, continue with the following steps.
4. Click Add (or the + button in the Print & Fax utility) to open the Printer Browser screen.
5. Use Bonjour for the network connection. Carry out the following steps:
a. Click the Default Browser tab.
b. Select the HP LaserJet P2030 Series printer from the list. The software verifies that the printer
is connected to the network and the Print Using field is automatically populated with the
correct driver for the printer.
NOTE: If the HP LaserJet P2030 Series printer does not appear in the list, verify that the
printer is on and connected to the network, then try turning the printer off and then on again.
If the HP LaserJet P2030 Series driver does not appear in the Print Using pull-down list,
turn the computer off and then on again, then restart the setup process. For more
troubleshooting information, see
Troubleshooting the printer setup on page 138.
6. Click Add. The product name appears in the Printer List and the setup is complete.
ENWW Macintosh installation instructions 137
Macintosh