HP LaserJet P3005 - User Guide

CLEARABLE
WARNINGS and AUTO
CONTINUE settings off.
Then print the job again.
The print job is not
formatted correctly.
Paper is not fed correctly or
is damaged.
There are print-quality problems.
●
Check that you are using
the correct device driver.
(See
Select the correct
printer driver)
●
Check the program
settings. (See the
program online Help.)
●
Try a different font.
●
Downloaded resources
might have been lost.
You might need to
download them again.
●
Make sure that the paper
is loaded correctly and
that the guides are not
too tight or too loose
against the stack.
●
If you are having
problems printing
custom-size paper, see
Print
●
If pages are wrinkled or
curled, or if the image is
skewed on the page,
see
Solve print-quality
problems.
●
Adjust the print resolution. (See
Print Quality submenu)
●
Check that REt is on. (See
Print Quality submenu)
●
Go to
Solve print-quality problems
Step 5: Does the device select the trays?
YES
For other problems, check the Contents, the Index, or the device driver online
Help.
NO
The device pulls paper from the wrong
tray.
An optional tray is not working
correctly.
A message other than READY
appears on the device control panel
display.
●
Make sure that you have selected
the correct tray. (See
Source)
●
Make sure that trays are correctly
configured for paper size and type.
(See
Load media) Print a
configuration page to see current
tray settings. (See
Use information
pages) Ensure that the media-size
window on the front of the tray
matches the size setting on the
control panel.
●
Make sure that the tray selection
(Source) or Type in the device
driver or program is set correctly.
(The device driver and program
settings override the device control
panel settings.)
●
By default, paper loaded in tray 1
will be printed first. If you do not
want to print from tray 1, remove
any paper loaded in the tray or
change the USE REQUESTED
TRAY setting. (See
Use
information pages) Change TRAY
●
Print a configuration page to verify
that the tray is installed correctly
and is functional. (See
Use
information pages)
●
Configure the device driver to
recognize the installed tray. (See
the device driver online Help.)
●
Turn the device off and then on.
●
Verify that you are using the correct
optional tray for the device.
●
Go to
Control-panel messages
106 Chapter 7 Problem solving ENWW