HP LaserJet P3005 Series printers HP Embedded Web Server User Guide
HP Embedded Web Server User Guide
Copyright Trademark Credits © 2005 Copyright Hewlett-Packard Development Company, L.P. Adobe® and PostScript® are trademarks of Adobe Systems Incorporated. Reproduction, adaptation or translation without prior written permission is prohibited, except as allowed under the copyright laws. Linux is a U.S. registered trademark of Linus Torvalds The information contained herein is subject to change without notice. Microsoft® and Windows® are U.S. registered trademarks of Microsoft Corp.
1 Overview What is an embedded Web server? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Additional features with a permanent storage device . . . . . . . . . . . . . . 2 HP Web Jetadmin and the HP Embedded Web Server. . . . . . . . . . . . . 2 System requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Opening the HP Embedded Web Server. . .
iv ENWW
1 Overview What is an embedded Web server? A Web server provides an environment in which Web programs can run, in much the same way that an operating system, such as Microsoft® Windows®, provides an environment in which programs can run on your computer. A Web browser, such as Microsoft Internet Explorer, Apple Safari, Mozilla, or Firefox can show output from a Web server.
Features You can use the HP Embedded Web Server to view product and network status and to manage printing functions from your computer, rather than at the product control panel. With the HP Embedded Web Server, you can perform these tasks: ● View control-panel messages and product-status information. ● Determine the remaining life for all supplies and configure specific ordering information for supplies. ● Gain access to the product's technical support page.
System requirements In order to use the HP Embedded Web Server, you must have the following components: ● One of the following Web browsers in this list (but not limited to) installed on your computer: ● A supported Web browser. EWS-supported Web browsers include (but are not limited to) the following: • Konqueror 3.0 or later • Microsoft Internet Explorer 6.0 or later • Mozilla 1.0 (and Mozilla derivatives) • Firefox 1.0 or later • Netscape Navigator 6.2 or later • Opera 7.0 or later • Safari 1.
To log in as an administrator Use the following procedure to log in to the HP EWS as an administrator. 1 After you open the EWS, click the Log In link in the upper-right corner of the screen. The Enter Network Password dialog box appears, as shown in the following illustration. The appearance of the login screen might vary, depending on your operating system and browser. 2 Type admin for the user name, type your password, and then click OK.
Navigating through the HP Embedded Web Server To navigate through the HP Embedded Web Server screens, click one of the tabs (such as Information or Settings), and then click one of the menus on the navigation bar that is located on the left side of the screen. The following illustration and table provide information about the EWS screens.
Callout EWS screen Description feature 4 Other Links hp instant support Order Supplies Product Support Show Me How 5 6 Log In/Log Off Screen 6 Overview Different for each type of user Different on each menu More information Connect to a set of Web resources ● See “Using the Other Links as a that help solve problems and resource” on page 43. describe the additional services that ● See “hp instant support” on page 44. are available for your HP product. ● See “Product Support” on page 45.
2 Viewing product status from the Information screens The Information screens are for informational purposes only; you cannot configure the product from these screens. To configure the product through the EWS, see “Configuring the product from the Settings screens” on page 19.
Device Status Use the Device Status screen to view the current status of the product. The following illustration and table describe how to use this screen. 1 2 3 4 5 6 7 8 Callout Area on the screen 1 EWS tabs and menus 2 Status 3 Control-panel buttons 4 5 Supplies Supplies Details Information or capability that the area provides For more information, see “Navigating through the HP Embedded Web Server” on page 5.
Callout Area on the screen 6 7 8 ENWW Media Change Settings Capabilities Information or capability that the area provides Shows the status and configuration information for the input trays and output bins. Opens the Other Settings screen, where you can change the paper-type settings. Lists components that are installed in the product.
Configuration Page Use the Configuration Page screen to view current product settings, help troubleshoot printer problems, and verify the installation of optional accessories such as dual inline memory modules (DIMMs) or paper-handling devices. The following illustration and table describe how to use this screen. 1 2 3 4 5 6 Note: See the table on the following page for descriptions of the callouts in this illustration.
Callout Area on the screen 1 2 3 ENWW EWS tabs and menus Printer Information Installed Personalities and Options 4 Memory 5 Security 6 Paper Trays and Options Information or capability that the area provides For more information, see “Navigating through the HP Embedded Web Server” on page 5. Lists the serial number, version numbers, and other information for the product.
Supplies Status The Supplies Status screen shows more detailed supplies information and provides part numbers for genuine HP supplies. (It is helpful to have the part numbers available when ordering supplies.) The following illustration and table describe how to use this screen. 1 3 4 2 5 Callout Area on the screen Information or capability that the area provides 1 2 3 4 5 EWS tabs and menus For more information, see “Navigating through the HP Embedded Web Server” on page 5.
Event Log The Event Log shows the most recent product events, including jams, service errors, and other printer errors. The following illustration and table describe how to use this screen. 1 2 3 4 5 6 Callout Area on the screen 1 2 3 4 5 6 7 ENWW EWS tabs and menus Information or capability that the area provides Event For more information, see “Navigating through the HP Embedded Web Server” on page 5. Lists the order in which the errors occurred. The last error to occur has the highest number.
Usage Page The Usage Page screen gives a page count for each size of media that has passed through the product, as well as the number of duplexed pages. The total is calculated by multiplying the sum of the print count values by the Units value. The information on this screen can be used to determine how much toner or paper to keep on hand. The following illustration and table describe how to use this screen.
Callout Area on the screen 1 EWS tabs and menus 2 Usage Totals (equivalent) 3 4 5 Units Print Modes & Paper Path Usage (actual) Historical Printer Coverage Information or capability that the area provides For more information, see “Navigating through the HP Embedded Web Server” on page 5.
Control Panel For products that have a control panel, the Control Panel screen shows the product control-panel display as if you were standing at the product. Because this view shows the product status, it can help you troubleshoot problems with the product. Note The appearance of the screen might vary, depending on your product.
Print You can use this screen to print one file at a time from a product that supports the HP Embedded Web Server. This feature is especially useful if you are a mobile user, because you do not have to install the product’s printer driver in order to print—you can print anywhere at any time. You can print print-ready files, such as documents that have been generated by using a “print to file” driver option. Print-ready files commonly have file name extensions such as .PRN (Windows Print Ready File), .
Printing a file from the Print screen Use the following steps to print a file from the Print screen. 1 Select the file that you want to print by using one of the following options: • Click the button under Option 1 to browse to a file that you want to print. -or• Type the address (beginning with “http://”) in the Address field (under Option 2) to print a file that is available over your intranet. 2 Click Apply.
3 Configuring the product from the Settings screens Use the screens on the Settings tab to configure the product from your computer. The following are the Settings screens: Note ENWW ● Configure Device (page 20) ● E-mail Server (page 21) ● Alerts (page 23) ● AutoSend (page 31) ● Security (page 33) ● Edit Other Links (page 34) ● Device Information (page 36) ● Language (page 37) ● Date & Time (page 38) ● Wake Time (page 39) Some products do not support all of these screens.
Configure Device You can use the Configure Device screen to print product information pages and configure the product remotely. The following illustration, table, and example procedure describe how to use this screen. If your product has a control-panel display, these menus are similar to the menus that are available at your product control panel. Some of the product control-panel menus are not available from the HP Embedded Web Server.
Callout Area on the screen Information or capability that the area provides Plus sign 3 Click the plus sign ( ) next to a menu, or click the menu itself, to see the submenus or subentries. Using the menus on the Configure Device screen The following procedure is provided only as an example. Similar procedures can be used to set other menu items. Follow these steps to select a different default paper size (example procedure). Note 1 Click PAPER HANDLING.
Callout Area on the screen Information or capability that the area provides 1 2 3 4 EWS tabs and menus For more information, see “Navigating through the HP Embedded Web Server” on page 5. Outgoing e-mail Configure outgoing e-mail if you intend to use the Alerts or AutoSend features. For more information, see “Using the Alerts screen with a product” on page 24. Device E-mail Address This is the product’s e-mail address that appears in product alerts.
Alerts From the Alerts screen, IT administrators can set up the product to send problem and status alerts to anyone through e-mail messages. When this function is configured, alerts are automatically triggered about supplies and paper-path status, as well as for service and advisory information. More than one individual can receive alerts, with each person receiving only specific alerts.
Callout Area on the screen 1 EWS tabs and menus 2 Destination list summary 3 4 5 6 Edit Test Delete New Destination List Information or capability that the area provides For more information, see “Navigating through the HP Embedded Web Server” on page 5. Lists the current selections for each destination. Click this button to make changes to the destination or destination list. Click this button to send a test alert to the destination or destination list.
If a permanent storage device is installed, the screen that appears looks similar to the following illustration.
26 Configuring the product from the Settings screens ENWW
2 For products that have permanent storage devices installed, type a name in the List Name field, such as Service or Supplies. (If you do not have a permanent storage device, continue to step 3.) 3 Type the e-mail addresses for people who you want to receive alerts. In large environments, system administrators can route e-mail addresses to list servers, uniform resource locators (URLs), and mobile devices for expanded alerts.
To test the configuration of a destination list Use the following procedure to test the destination list configuration. 1 Click the Test button next to the destination list that you want to test. The following window appears. (This illustration shows the screen from a system that has a permanent storage device installed. If no permanent storage device is installed, only one destination can be tested from this window.
3 The return address is the product’s e-mail address. Type your e-mail address in the Return Address box if you would like to receive messages about any errors that are generated from the test alert (for example, to be notified of an incorrect destination address). 4 If applicable, type additional information that you would like to appear at the beginning of the e-mail alert message in the Your Notes (optional) text field. 5 Click OK.
Note Depending on delays in the network and your organization’s mail server, a response might take from 1 minute to several hours to arrive in your e-mail program’s Inbox. If the To, From, and Subject fields are not correctly formatted in your e-mail message, the product does not send a message in response.
AutoSend Use the AutoSend screen to send product-configuration and supplies-usage information periodically to your service provider. This feature establishes a relationship with Hewlett-Packard Company or another service provider to provide you with services that include, but are not limited to, toner replacement, pay-per-page contracts, support agreements, and usage tracking. The following illustration, table, and procedure describe how to use this screen.
Callout Area on the screen 5 6 Send to HP Test Information or capability that the area provides Select this check box to send device configuration and supplies status information to HP on a regular basis. The information will be sent to an HP e-mail address (for example, myprinter@hp.com) in a text-based file with an .XML file extension. This file will be created in English.
Security The following illustration and table describe how to use this screen. 1 2 3 4 Callout Area on the screen ENWW 1 EWS tabs and menus 2 Set Password 3 Print Page 4 Display On Device Status Page Information or capability that the area provides For more information, see “Navigating through the HP Embedded Web Server” on page 5. Set an administrator password to control who can gain access to the EWS Settings and Networking tabs.
Edit Other Links Use the Edit Other Links screen to add or customize up to five links to the Web sites of your choice (see the following note). These links appear throughout the HP Embedded Web Server screens, in the Other Links box beneath the left navigational bar. Three permanent links (hp instant support, Order Supplies, and Product Support) have already been established. The following illustration, table, and procedures describe how to use this screen.
Callout Area on the screen Information or capability that the area provides 4 Other Links hp instant support Order Supplies Product Support Show Me How My Service Provider My Service Contract Connect to Web resources that help you to solve specific problems and determine what additional services are available for your product. (Detailed information, including serial number, error conditions, and status, is forwarded to HP Customer Care. Hewlett-Packard Company treats this information as confidential.
Device Information Use the Device Information screen to provide a name of your choice for the product, assign an asset number, and configure the company name, the person to contact about the product, and the physical location of the product. The product IP address, product name, product model, and serial number are also available on this screen. Note If you make any changes on the Device Information screen, click Apply to save the changes.
Language Use the Language screen to select the language in which the HP Embedded Web Server screens appear. The following illustration and table describe how to use this screen. 1 2 3 4 CAUTION Selecting View Pages in Printer Language or Select a Language changes the language for everyone who uses the HP Embedded Web Server.
Date & Time Use the Date & Time screen to update the product time. The following illustration and table describe how to use this screen. 1 2 4 3 Callout Area on the screen 1 2 EWS tabs and menus Current Date and Current Time 3 Date/Time Format 4 Get Time 38 Configuring the product from the Settings screens Information or capability that the area provides For more information, see “Navigating through the HP Embedded Web Server” on page 5. Shows the product date and time when the EWS was opened.
Wake Time An IT administrator can use the Wake Time screen to schedule product wakeups on a daily basis. For example, the product can be set to wake up at 07:30, so the product has finished initializing and calibrating and is ready to use by 08:00. The administrator only sets one wakeup setting per day; however, each day can have a different wakeup setting. Additionally, to save energy, the sleep delay can be set to turn the product off after a specific period of inactivity.
40 Configuring the product from the Settings screens ENWW
4 Managing network operation from the Networking screens Overview Use the Networking screens to configure and manage your product on your network. The appearance and features of the Networking screens differ depending on the model and version of your HP Jetdirect print server. The following screen is similar to what you might see when you click Networking. From the left navigational bar, click the Networking menu for the screen that you want to view.
Callout Area on screen 1 EWS tabs and menus 2 Select Language 3 Help Information or capability that the area provides For more information, see “Navigating through the HP Embedded Web Server” on page 5. Select the language for the Networking tab. The list of languages that are available in the Networking tab is not identical to the list of languages that are available in the Settings tab. Click Help for more information about the options on the Networking tab.
5 Using the Other Links as a resource The Other Links box contains four permanent links that provide quick access to product-specific information, such as interactive troubleshooting and ordering information for genuine HP supplies. Note ENWW You can use the Edit Other Links screen on the Settings tab to add up to five customized links to the Web sites of your choice.
hp instant support Hewlett-Packard Company offers hp instant support, an Internet-based support system that collects diagnostic information from your product and matches it with the HP information database. At hp instant support, you can find intelligent solutions that help you resolve problems quickly and easily. How hp instant support works Information is gathered from your product and securely transmitted to Hewlett-Packard Company when you click hp instant support.
Product Support The Product Support link connects you to a Web page that brings together a comprehensive menu of support resources that business people need. From this Web page, you can accomplish these tasks and more: ● Find a list of HP products at one site: computers, workstations, servers, storage devices, printer, scanners, digital imaging, and mobile devices. ● Obtain technical support.
46 Using the Other Links as a resource ENWW
Index A E accessing the HP Embedded Web Server 3 accessories, verifying installed 10 administrators alerts, setting up 23 logging off 4 logging on 3 wake time settings 39 alerts configuring 24 destination lists, testing 28 e-mail configuration 22 e-mailing information pages 29 features 2, 23 asset number 15 AutoSend 31 Edit Other Links screen 34, 43 e-mail alerts 23 incoming, configuring 22 information pages 29 outgoing, configuring 22 settings 21 support 45 E-mail Server screen 21 embedded Web server de
K keys, control panel 8 Konqueror, versions supported 3 L Language screen 37 links 34, 43 log, event 13 logging off 4 logging on 3 printing files 17, 18 PRN files 17 product support 45 products, defined 1 PS files, printing 17 R recycle supplies 45 remote configuration 20 S M mailbox configuration 22 media usage 14 memory, verifying installed 10 menus control panel 20 HP Embedded Web Server 5 messages, error 13 Microsoft Internet Explorer, versions supported 3 mobile devices, printing from 17 Mozilla, v
Web server, embedded defined 1 features 2 Web sites, support instant 44 product 45 ENWW Index 49
50 Index ENWW
© 2005 Hewlett-Packard Development Company, L.P. Printed in the US www.hp.
