- HP Laserjet Pro 100 Color MFP M175 Manual

Inner cover
Before proceeding, remove the following components:
●
Right cover. See
Right cover on page 16
●
Left cover. See
Left cover on page 17.
●
Document feeder. See
Document feeder on page 18.
●
Document feeder hinges. See
Document feeder hinges on page 21.
●
Top door, rear-top cover, and delivery cover. See
Top door, rear-top cover, and delivery cover
on page 22.
●
Control panel. See
Control panel on page 29.
●
Left-front cover. See
Left-front cover on page 31.
Remove the inner cover
1. Remove one spring (callout 1), and then remove the door retainer arm (callout 2).
Figure 1-37 Remove the inner cover (1 of 4)
1
2
ENWW
Removal and replacement procedures
35