- HP Laserjet Pro 100 Color MFP M175 Manual

8. Release the wire harness (callout 1) from the guide (callout 2), and then pull the wire harness
through the hole in the chassis.
Figure 1-88 Remove the low-voltage power supply assembly (8 of 9)
2
1
9. Disconnect three connectors (callout 1) and remove the low-voltage power supply assembly
(callout 2).
Figure 1-89 Remove the low-voltage power supply assembly (9 of 9)
1
2
ENWW
Removal and replacement procedures
67