9.0 HP StorageWorks P4000 VSA Installation and Configuration Guide

If you want to control which systems appear in the CMC, you can change the configuration using the
following steps.
1. Open the CMC.
2. Click Find Systems on the Getting Started Launch Pad.
In the Find Systems window, use these features to control the list of systems:
• Clear Auto Discover by Broadcast to prevent the entire subnet of systems from appearing in
the navigation pane.
• Add individual IP addresses of systems that you want to appear in the navigation pane.
Figure 2 Editing Find Systems to control the systems displayed
.
1. Clear Auto Discover by Broadcast
2. Add IP addresses for specific systems
Verify the hardware configuration
Ensure the hardware configuration is correct before adding the VSA to a management group. Select
the VSA in the navigation window to expand the hardware configuration categories. Verify that virtual
RAID is configured. Verify that the TCP/IP Network settings are correct.
Getting started with the P4000 SAN18