10.5 HP StoreVirtual Storage VSA Installation and Configuration Guide (TA688-96138, March 2013)

2. Click Find Systems on the Getting Started Launch Pad.
In the Find Systems window, use these features to control the list of systems:
• Clear Auto Discover by Broadcast to prevent the entire subnet of systems from appearing
in the navigation pane.
• Add individual IP addresses of systems that you want to appear in the navigation pane.
Figure 1 Editing Find Systems to control the systems displayed
1. Clear Auto Discover by Broadcast
2. Add IP addresses for specific systems
Verify the hardware configuration
Ensure the hardware configuration is correct before adding the VSA to a management group.
Select the VSA in the navigation window to expand the hardware configuration categories. Verify
that virtual RAID is configured. Verify that the Network settings are correct.
Getting started with the CMC 15