HP StorageWorks LUN Configuration and Security Manager XP user guide for the XP12000/XP10000/SVS200 LUN Manager and Volume Manager (T1714-96015, October 2007)
b. Right-click the copy destination port, and select Paste.Ifaconfirmation message appears,
click OK.
NOTE:
You cannot paste paths to initiator port.
4. To copy one or more (but not all) LU paths defined to a host group or iSCSI target, complete the
following steps:
a. In the tree, select the host group or iSCSI target.
b. In the LU Path table, select one or more LUNs to which volumes are assigned. (If a volume is
assigned to a LUN, columns on the right of the LUN column are not empty.)
c. Right-click the selection, and select Copy Paths. The selected LUNs turn green.
d. Double-click the copy destination port to display host groups or iSCSI targets below the port.
e. Right-click the host group to which you want to paste paths, and select Paste Paths.Ifa
confirmation message appears, click OK.
NOTE:
You cannot paste paths to host groups or iSCSI targets for initiator ports.
5. Click Appl
y.Aconfirmation message appears.
6. Click OK. Settings are applied to the array.
Copying paths from one NAS port to another
CAUTION:
Before taking the following steps, see Notes on using LUN Manager for important information.
1. Start LUN Manager, and display the LUN Manager pane (Figure 14).
2. To specify the LU paths you want to copy:
a. In the tree, double-click a NAS port (copy source port), and select the User host group.
b. From the LU Path list, select one or more LUNs to which volumes are assigned. If a volume is
assigned to a LUN, columns on the right of the LUN column are not empty.
c. Right-click the selection, and select Copy Paths. The selected LUNs turn green.
3. To paste the LU paths:
a. In the tree, double-click the copy destination port (NAS port). The User host group appears
below the port.
b. Right-click the User host group, and select Paste Paths.
4. Click Apply.Aconfirmation message appears.
5. Click OK. Settings are applied to the array.
Copying paths from a Fibre Channel or iSCSI port to a NAS port
CAUTION:
Before taking the following steps, see Notes on using LUN Manager for important information.
HP StorageWorks LUN Configuration and Security Manager XP user guide for the
XP12000/XP10000/SVS200
103