SVS200 LUN Manager and Volume Manager (T1714-96015, October 2007)

Aconﬁrmation message appears.

5. Click OK.

6. Click Apply.Aconﬁrmation message appears.

7. Click OK. Settings are applied to the array.

NOTE:

Storage partition administrators cannot apply High Speed or Initiator/External MIX mode.

Making settings on iSCSI ports and iSNS servers

Use the Port pane (Figure 22)toconﬁgure iSCSI ports in the array. You can also use this pane to make

settings on iSNS servers and modify settings when the system is operating.

Making settings on iSCSI ports

1. Start LUN Manager, and display the Port pane (Figure 22).

2. In the Package tree, select the iSCSI folder. The Port table displays a list of iSCSI ports in the array.

NOTE:

If you specify a channel adapter in the Package tree, the Port table displays only ports

in the speciﬁed channel adapter.

3. In the Port

table or Select a Port list, select an iSCSI port. The iSCSI port's current conﬁguration

appears below the Select a Port list.

4. To make settings on the iSCSI port, edit items below the list. For more information about the items,

see iSCSI

port and iSNS server settings.

NOTE:

Use the ve

rtical scroll bar to view all items.

5. Click Set.Aconﬁrmation message appears.

6. Click OK. Settings are applied to the Port table, but not to the array. Changes appear in blue.

7. Click Apply.Aconﬁrmation message appears.

8. Click OK. Settings are applied to the array.

Making settings on iSNS servers

You can register iSCSI ports to the iSNS server by clicking Register or delete iSCSI ports from the iSNS

server by clicking Delete.

1. Start LUN Manager, and display the Port pane (Figure 22).

2. In the iSCSI Function box, click Register or Delete. The Register Ports to iSNS Server or Delete

Ports from ISNS Server pane appears.

HP StorageWorks LUN Conﬁguration and Security Manager XP user guide for the

XP12000/XP10000/SVS200

111