SVS200 LUN Manager and Volume Manager (T1714-96015, October 2007)

Figure 75 LightPulse Utility/NT pane

If yo

u do not have a shortcut to the Utility, do the following:

a. Go to the Start menu, select Find,andchooseFiles and Folders. The Find pane opens.

b. In the Named ﬁeld, enter lputilnt.exe.

In t

he Look in box, choose the hard drive containing the Emulex mini-port driver.

c. Click Find Now to search for the LightPulse Utility.

NOTE:

If you cannot ﬁnd the LightPulse Utility, contact Emulex technical support.

d. In the Find: Files named list box, select lputilnt.exe,andpressEnter.TheLightPulseUtility/NT

pane appears.

4. In the list on the left of the pane, verify that the installed adapters appear.

5. In the Category list, select Conﬁguration Data.IntheRegion list, select 16 World-Wide Name.The

selected adapter's WWN appears in the list on the right of the pane.

FindingWWNsinSunSolarisenvironments

HP currently supports the JNI Fibre Channel adapter in Sun Solaris environments. This information will be

updated as needed to cover future adapter-speciﬁc information as those adapters are supported. For

more information about Fibre Channel adapter support, or if you are using a Fibre Channel adapter

other than JNI, contact you HP account support representative for instructions for ﬁnding the WWN.

1. Verify that the ﬁbre adapters and Fibre Channel device drivers are installed.

2. Login to the Sun Solaris host with root access.

3. Enter dmesg |grep Fibre. A list of installed Fibre Channel devices and their WWNs appears.

# dmesg |grep Fibre ← Enter the dmesg command.

fcaw1: JNI Fibre Channel Adapter model FCW

fcaw1: Fibre Channel WWN: 200000e0694011a4 ← Record the WWN.

fcaw2: JNI Fibre Channel Adapter model FCW

fcaw2: Fibre Channel WWN: 200000e06940121e ← Record the WWN.

136

Finding an open-system host's World Wide Name (WWN)