SVS200 LUN Manager and Volume Manager (T1714-96015, October 2007)

NOTE:

The RAID level is left unspeciﬁed with a hyphen (-)whentheLDEVisanexternalLUorvirtual

volume (V-VOL).

• PG: Combination of the disk group and parity group. If the LDEV extends over two or more parity

groups, the smaller parity group number appears.

NOTE:

If a parity group number starts with E (for example, E1-1), the parity group consists of one or more

external LUs.

NOTE:

If a parity group number starts with V (for example, V1-1), the parity group consists of one or

more virtual v

olumes (V-VOLs).

• CLPR: CLPR number and name. The CLPR number consists of two digits. The CLPR name consists

of up to six characters. For more information about cache logical partitions (CLPRs), see the

HP StorageWorks XP Disk/Cache Partition user guide.

• Selected LDEVs: Number of LDEVs selected in the Free LDEVs table.

Expanded LDEVs list

Displays LDEVs selected as LUSE volume components. An LDEV is added to this list by clicking Add.

• Selected LDEVs:NumberofLDEVsselectedintheExpanded LDEVs list.

• Number of LDEVs: Number of LDEVs displayed in the Expanded LDEVs list.

• Size: Total capacity of LDEVs displayed in the Expanded LDEVs list,ineitherGBorMG.

Buttons

• Add: Moves the selected LDEV from the Free LDEVs table to the Expanded LDEVs list.

• Delete: Move the selected LDEV from the Expanded LDEVs list to the Free LDEVs table.

• Set: Creates a LUSE volume consisting of the volumes currently in the Expanded LDEVs list. The

new LUSE appears in blue bold italics on the LDEV Information table, but is not actually created

until you click Apply.

• Apply: Implements settings on the array.

• Cancel:Cancelssettings.

Volume Manager operations shortcut menu

When you right-click one of the LDEVs in the LDEV Information table on the Volume Manager pane, a

shortcut menu listing commands for Volume Manager operations appears.

Figure 85 Volume Manager operations shortcut menu

• Set LUSE Volume

162

Volume Manager operations