HP StorageWorks LUN Configuration and Security Manager XP user guide for the XP12000/XP10000/SVS200 LUN Manager and Volume Manager (T1714-96015, October 2007)

NOTE:
If an LDEV number ends with # (for example, 00:01#), the LDEV is an external LU. For more
information about external LUs, see the
HP StorageWorks External Storage XP user guide .
NOTE:
If an LDEV number ends with V (for example, 00:00V), the LDEV is a virtual volume (V-VOL). For
more information about virtual volumes, see the
HP StorageWorks Snapshot XP user guide .
• Select LDEV No. area: Used to set LDEV numbers for the CVS volumes you are creating.
• Select CU No.:CUnumber.ThedefaultisCU 00.ThesettingsofLDEVnumbersforthe
selected CU nu
mber appear in the Select LDEV No. table.
• Interval: When you select more than one volume, used to set the interval between the LDEV
numbers that need to be assigned to the newly created volumes. The default value is 0.When
you select 0,c
onsecutive LDEV numbers are assigned.
NOTE:
The value you s
pecify as the interval between LDEV numbers counts only available LDEV numbers
andskipsthosethatarenotselectable.
• Select LDEV No. table: Displays the settings of LDEV numbers for the CU number selected
from the Select CU No. list. Gray indicates the LDEV numbers that are not selectable, white
indicates unused LDEV numbers, and blue indicates available LDEV numbers. You can select
an LDEV number from the white LDEV numbers in the table. When you set the LDEV number,
that LDEV number becomes available and changes to blue.
NOTE:
LDEV numbers that are not selectable may be already in use or already assigned to another
emulation group (grouped by 32 LDEV numbers) (see Table 38).
NOTE:
If an LDEV number ends with # (for example, 00:01#), the LDEV is an external LU. For more
information about external LUs, see the
HP StorageWorks External Storage XP user guide .
NOTE:
If an LDEV number ends with V (for example, 00:00V), the LDEV is a virtual volume (V-VOL). For
more information about virtual volumes, see the
HP StorageWorks Snapshot XP user guide .
• CU number o
f another SLPR is used: When selected, you can select the number of an LDEV that
does not exist in the SLPR to which the parity group does not belong. When cleared, you can
onlyselectthenumberofanLDEVintheSLPRtowhichtheparitygroupbelongs.
NOTE:
The CU number of another SLPR is used check box appears only when you log in as a storage
administrator and when there are two or more SLPRs.
• Back:ReturnstoMakeVolumepane(1).
• Next: Opens one of the following panes:
190
Custom Volume Size operations