SVS200 LUN Manager and Volume Manager (T1714-96015, October 2007)

• CU number of another SLPR is used: When selected, you can select the number of an LDEV that

does not exist in the SLPR to which the parity group does not belong. When cleared, you can

onlyselectthenumberofanLDEVintheSLPRtowhichtheparitygroupbelongs.

NOTE:

The CU number of another SLPR is used check box appears only when you log in as a storage

administrator and when there are two or more SLPRs.

• Next: Opens one of the following panes:

• If the selected LDEV number's boundary area does not have an SSID, the Volume Initialize

pane (2) for setting an SSID appears.

• If the selected LDEV number's boundary area has an SSID, the Volume Initialize pane (3)

appears.

• Cancel: Cancels the settings for the LDEV, and returns to the Customized Volume pane.

• Clear: Removes a CU:LDEV number that is already assigned. To remove a CU:LDEV number,

right-click a CVS volume number corresponding to the CU:LDEV number you want to remove,

and select Clear.

Volume Initialize pane (2)

This pane appears during the initialization of CVS volumes if the selected LDEV number's boundary area

does not have an SSID. You can set an SSID on the Volume Initialize pane (2).

Figure103VolumeInitializepane(2)forsettingSSIDs

This pane has the following features:

• Set SSID tree: Displays a hierarchical structure of SSID setting information containing CU numbers

(for example, CU 00), SSID boundary areas (for example, 00-3F), and SSID (for example, 0004).

When a selected LDEV number's SSID boundary area has no SSID, the following icon appears

before the related CU number and LDEV boundary area. The SSID of a boundary area having

no SSID is ----.

HP StorageWorks LUN Conﬁguration and Security Manager XP user guide for the

XP12000/XP10000/SVS200

195