SVS200 LUN Manager and Volume Manager (T1714-96015, October 2007)

Figure 16 Fibre folder

Table 7 Fibre Channel port icons

Icon

Status

Port in Standard mode. LUN security is disabled on the port.

Port in Stand

ard mode. LUN security is enabled on the port.

Port in High Speed mode. LUN security is disabled on the port.

Port in High Speed mode. LUN security is enabled on the port

Port in Initiator/External MIX mode. LUN security is disabled on the port.

Port in Initiator/External MIX mode. LUN security is enabled on the port.

When you dou

ble-click a Fibre Channel port in the tree, a list of host groups (

) appears. The host

group's gro

up number (G-ID), host group name, and host mode appear on the right of this icon. For

more infor

mation about host modes, see Table 16.

When you double-click a host group in the tree, a list of host bus adapters (

) appears. The host

bus adapter's nickname and World Wide Name (WWN) appear on the right of this icon. For more

information about WWNs, see Finding an open-system host's World Wide Name (WWN).

NOTE:

Host bus adapters

areadapterscontainedinhostcomputersandareusedasportsforconnecting

hosts and the array.

When you double-click a port on which LUN security is disabled to display a list of host groups, host

groups except the ﬁrsthostgroup(thatis,hostgroup0)aregrayedout.

NAS folder

If you double-click the NAS folder, NAS ports in the array appear as icons. Four port names appear

on the right of each icon. The channel adapter name appears on the right of the port names. The

channel adapter name is enclosed by parentheses.

NOTE:

The NAS folder does not appear if the array does not contain NAS channel adapters.

HP StorageWorks LUN Conﬁguration and Security Manager XP user guide for the

XP12000/XP10000/SVS200