SVS200 LUN Manager and Volume Manager (T1714-96015, October 2007)

• Type:Port‘stype.Fibre indicates a Fibre Channel port, which is used for connecting

open-system hosts.

• Host Speed: Fibre Channel port's data transfer speed. The unit is Gbps (gigabits per second).

• Addr (Loop ID): Port‘s address.

• Fabric: Indicates if a fabric switch is used.

• Connection: Topology. The default is FC-AL. However, you must be aware that some fabric

switches require you to specify the point-to-point topology. If your system uses a fabric

switch, check the fabric switch's documentation to determine whether the switch requires

the point-to-point topology.

• Attribute: Indicates whether the port is an initiator, target, RCU target, or external port.

• WWN: Host bus adapter's WWN.

• If you select an iSCSI channel adapter, the list displays information about iSCSI ports and iSNS

servers.

Figure 25 Port table (iSCSI ports and iSNS servers)

• Port Name: iSCSI port's name. For more information, see Table 3, Table 4, Table 5,and

Table 6.

• IP Address: iSCSI port's IP address.

• Subnet Mask:Subnetmask.

• Gateway: Gateway address.

• Port No.: iSCSI port's number.

• Keep Alive Timer:Keep-alivetimervalue. Theunitisseconds.

• iSNS Server: Indicates whether you can register the iSCSI port in the iSNS server.

• Enable: You can register the iSCSI port.

• Disable: You cannot register the iSCSI port.

• iSNS IP Address: iSNS server's IP address.

• iSNS Port No.: iSNS server's TCP port number.

• MAC Address: iSCSI port's MAC address (media access control address).

• Attribute:Port'sattribute.

NOTE:

iSCSI ports always have the Target attribute.

LUN Manager panes