SVS200 (T1714-96008, June 2006)

LUN Configuration and Security Manager XP user guide for the XP12000/XP10000/SVS200 161

NOTE: If a parity group number starts with E (for example, E1-1), the parity group consists of one

or more external LUs.

NOTE: If a VDEV number starts with V (for example, V1-1-(1)), the VDEV belongs to a parity

group that consists of one or more virtual volumes (V-VOLs).

• Emulation Type: Emulation type.

• Capacity Unit: Unit (MB, Cyl, or block) in which the volume capacity is displayed.

• Capacity: CVS volume’s capacity in the unit selected in the Capacity Unit list. The available capacity

range (minimum - maximum) is shown on the right (for example, 46 - 6720 MB, 50 - 7168 Cyl, or

315 - 8513 blocks). The value can be incremented by 1 MB, cylinder, or block.

• Set: Displays the selected settings in the LDEV information table on the left.

• Delete: Deletes the settings for the CVS volumes selected in the LDEV information table.

• LDEV information table: Displays the following information about the CVS volume settings:

• No.: CVS volume’s setting number.

• Emulation: CVS volume’s emulation type.

• Capacity: CVS volume’s capacity displayed in the unit selected from the Capacity Unit list.

• Available LDEVs: Number of LDEVs that can be created in the VDEV. The maximum is 512 LDEVs for

RAID5 (7D+1P) or RAID6 (6D+2P), and 256 LDEVs for other RAID levels.

• Next: Displays the Install CV pane (2).

• Cancel: Cancels the selected settings and returns to the Customized Volume pane.

Install CV pane (2)

This pane displays the CVS volumes to be created in the table on the top. You can specify the CVS

volume’s CU and LDEV numbers.

Figure 96 Install CV pane (2)