SVS200 (T1714-96008, June 2006)

LUN Configuration and Security Manager XP user guide for the XP12000/XP10000/SVS200 65

• Type: Port‘s type. Fibre indicates a Fibre Channel port, which is used for connecting open-system

hosts.

• Host Speed: Fibre Channel port’s data transfer speed. The unit is Gbps (gigabits per second).

• Addr (Loop ID): Port‘s address.

• Fabric: Indicates if a fabric switch is used.

• Connection: Topology. The default is FC-AL. However, you must be aware that some fabric

switches require you to specify the point-to-point topology. If your system uses a fabric switch,

check the fabric switch’s documentation to determine whether the switch requires the point-to-point

topology.

• Attribute: Indicates whether the port is an initiator, target, RCU target, or external port.

• WWN: Host bus adapter’s WWN.

• If you select an iSCSI channel adapter, the list displays information about iSCSI ports and iSNS

servers.

Figure 25 Port table displaying (iSCSI ports and iSNS servers)

• Port Name: iSCSI port’s name. For more information, see Table 3, Table 4, Table 5, and Table 6.

• IP Address: iSCSI port’s IP address.

• Subnet Mask: Subnet mask.

• Gateway: Gateway address.

• Port No.: iSCSI port’s number.

• Keep Alive Timer: Keep-alive timer value. The unit is seconds.

• iSNS Server: Indicates whether you can register the iSCSI port in the iSNS server.

• Enable: You can register the iSCSI port.

• Disable: You cannot register the iSCSI port.

• iSNS IP Address: iSNS server’s IP address.

• iSNS Port No.: iSNS server’s TCP port number.

• MAC Address: iSCSI port’s MAC address (media access control address).

• Attribute: Port’s attribute.

NOTE: iSCSI ports always have the Target attribute.