SVS200 (T1714-96008, June 2006)

LUN Configuration and Security Manager XP user guide for the XP12000/XP10000/SVS200 85

4. In the LU Path table, select one or more LUNs to which volumes are assigned. (If a volume is assigned

to a LUN, columns on the right of the LUN column are not empty.)

5. Right-click the selection, and select Release LU Path. A confirmation message appears.

Figure 45 Information about LU paths to be deleted (Fibre Channel environments)

Figure 46 Information about LU paths to be deleted (iSCSI environments)

6. Click OK. The selected LU path is removed from the table.

7. Click Apply. A confirmation message appears.

8. Click OK. Settings are applied to the array, and the specified LU paths are deleted.

NOTE: If you delete numerous paths at one time, the deletion process might take time and the

pane might seem to hang temporarily.

Changing a host group’s name and host mode

NOTE:

• You cannot perform this operation on host groups for initiator ports.

• You cannot perform this operation on host groups for NAS ports.