HP Integrity Virtual Server Manager 6.2 User Guide
Table Of Contents
- HP Integrity Virtual Server Manager 6.2 User Guide
- Contents
- 1 Introduction
- 2 Installing Integrity Virtual Server Manager
- 3 Accessing and Navigating Integrity Virtual Server Manager
- 4 Using Integrity Virtual Server Manager views and tabs
- 5 Using Integrity Virtual Server Manager menus
- 6 Working with VMs or vPars
- Working with VMs
- Planning VMs
- Creating VMs
- Modifying VMs
- Starting VMs
- Stopping VMs
- Restarting VMs
- Deleting VMs
- Migrating VMs
- Suspending VMs
- Resuming VMs
- Moving suspend files
- Creating virtual switches
- Starting, stopping, and deleting virtual switches
- Deleting network or storage devices
- Opening iLO console
- Opening virtual iLO remote console
- Deleting virtual iLO remote console
- Deleting DIOs
- Adding DIOs
- Replacing DIO H/W path
- Replacing DIO MAC address
- Working with vPars
- Creating vPars
- Modifying vPars
- Booting vPars
- Stopping vPars
- Resetting vPars
- Creating virtual switches
- Starting, stopping, and deleting virtual switches
- Deleting network or storage devices
- Deleting vPars
- Opening iLO console
- Opening virtual iLO remote console
- Deleting virtual iLO remote console
- Adding DIOs
- Replacing DIO H/W path
- Replacing DIO MAC address
- Deleting DIOs
- Working with VMs
- 7 Collecting and viewing utilization data
- 8 Viewing logs and version information
- 9 Support and other resources
- Information to collect before contacting HP
- How to contact HP
- Security bulletin and alert policy for non-HP owned software components
- Subscription service
- Registering for software technical support and update service
- How to use your software technical support and update
- HP authorized resellers
- New and changed information in this edition
- Related information
- Typographic conventions
- 10 Documentation feedback
- A Error messages, status indicators, and troubleshooting
- Glossary
- Index
Figure 74 Replace DIO H/W path page
To replace the DIO h/w path:
1. Select a guest from the Virtual Servers tab.
2. Select Modify→Replace DIO H/W Path.... After you select a guest, the Replace DIO H/W
Path... menu is enabled. If you select more than one guest, the menu items are not enabled.
The Modify DIO H/W Path... page is displayed.
Two tables are displayed, one is the guest DIO table and the other is the HPVM DIO table.
3. Select a DIO from the guest DIO table, and then select another DIO from the HPVM DIO table
to replace the selected DIO in the guest DIO table.
4. To view the MAC address parameters in the Command Preview field, select the Specify MAC
address parameters in command preview (advanced) check box.
NOTE: To view errors if any, related to the data that is entered, click Command Preview.
5. Click OK to replace the DIO h/w path.
Replacing DIO MAC address
You can replace the MAC address of DIOs owned by a VM or vPar.
Figure 75 Replace DIO MAC address page
To replace the DIO MAC address:
1. Select a guest from the Virtual Servers tab.
110 Working with VMs or vPars