HP Integrity Virtual Machines 4.2: Installation, Configuration, and Administration

VGDA 2
PE Size (Mbytes) 4
Total PE 8681
Alloc PE 8192
Free PE 489
Total PVG 0
Total Spare PVs 0
Total Spare PVs in use 0
--- Logical volumes ---
LV Name /dev/lvrackA/disk1
LV Status available/syncd
LV Size (Mbytes) 8192
Current LE 2048
Allocated PE 2048
Used PV 1
LV Name /dev/lvrackA/disk2
LV Status available/syncd
LV Size (Mbytes) 8192
Current LE 2048
Allocated PE 2048
Used PV 1
LV Name /dev/lvrackA/disk3
LV Status available/syncd
LV Size (Mbytes) 8192
Current LE 2048
Allocated PE 2048
Used PV 1
LV Name /dev/lvrackA/disk4
LV Status available/syncd
LV Size (Mbytes) 8192
Current LE 2048
Allocated PE 2048
Used PV 1
--- Physical volumes ---
PV Name /dev/disk/disk237
PV Status available
Total PE 8681
Free PE 489
Autoswitch On
In this example, the Virtual LvDisk resource statement is
disk:scsi::lv:/dev/lvrackA/rdisk2.
To use VxVM, the Virtual LvDisk resource statement takes the following form:
disk:scsi::lv:/dev/vx/rdsk/dg_name/v_name
where /dev/vx/rdsk/dg_name/v_name is a VxVM character device file for volume v_name
on disk group dg_name. To display the VxVM character device file name, enter the following
command:
# vxprint
Disk group: rootdg
TY NAME ASSOC KSTATE LENGTH PLOFFS STATE TUTIL0
PUTIL0
dg rootdg rootdg - - - - - -
dm disk01 c3t0d0 - 35562538 - - - -
Disk group: VxvmTest1
112 Creating Virtual Storage Devices