HP Storage Provisioning Manager (SPM) version 2.2 User Guide

<RaidLevel>RL5</RaidLevel>
<Presentations>
<VolumePresentation>
<ObjectID>Presentation-1</ObjectID>
<Access>ReadWrite</Access>
<LUN>0</LUN>
<InitiatorObjectID>
Object-1
</InitiatorObjectID>
<TargetObjectIDs>
<string>Object-2</string>
<string>Object-3</string>
</TargetObjectIDs>
</VolumePresentation>
</Presentations>
</Volume>
</Volumes>
</StoragePool>
</Pools>
The second volume contains a presentation that is not present in the first volume. This presentation
specifies that the host called “Object-1” will be presented read/write access to the two ports called
“Object-2” and “Object-3” from this storage array, and that it will use logical unit number zero to
represent this volume.
<Ports>
<StorageArrayPort>
<ObjectID>Object-4</ObjectID>
<Address>00:FF:AA:BB:DD:00:EE:10</Address>
<Kind>FibreChannel</Kind>
<Name>Port 0</Name>
</StorageArrayPort>
<StorageArrayPort>
<ObjectID>Object-5</ObjectID>
<Address>00:FF:AA:BB:DD:00:EE:11</Address>
<Kind>FibreChannel</Kind>
<Name>Port 1</Name>
</StorageArrayPort>
</Ports>
This storage array contains two ports, Object-4 and Object-5. Their Fibre Channel addresses are
specified above, together with their names.
<Targets>
<StorageArrayTarget>
<ObjectID>Object-2</ObjectID>
<ProtocolKind>FibreChannel</ProtocolKind>
<TargetName>00:FF:AA:BB:DD:00:EE:10</TargetName>
<TargetPortObjectIDs>
<string>Object-4</string>
</TargetPortObjectIDs>
</StorageArrayTarget>
<StorageArrayTarget>
<ObjectID>Object-3</ObjectID>
<ProtocolKind>FibreChannel</ProtocolKind>
<TargetName>00:FF:AA:BB:DD:00:EE:11</TargetName>
<TargetPortObjectIDs>
<string>Object-5</string>
</TargetPortObjectIDs>
</StorageArrayTarget>
</Targets>
The array contains two targets, both of which are referenced by the one Volume Presentation, and
which each reference a Port.
<HostEntries>
<StorageArrayHostEntry>
<ObjectID>Object-6</ObjectID>
<Name>Pierre host</Name>
<Hostmode>Normal</Hostmode>
Example of an unmanaged array XML file 111