HP Matrix Operating Environment support of VMware VXLAN environments

Sign up for updates
hp.com/go/getupdated
Share with colleagues
Rate this document
© Copyright 2014 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties
for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed
as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. Trademark acknowledgments, if
needed.
6 | 5900-3367, January 2014
2. Configure vShield Manager using its web console page, specifying the clusters which will be part of the VXLAN
environment.
3. Enter the segment ID and multicast address in the Segment ID tab (as shown below).
4. HP recommends creating only one network scope comprising of all clusters in a datacenter, that are to be a part
of the VXLAN environment, however any number of VXLAN wires can be created (subjected to VMware
limitations) . Create a single Network Scope to aggregate clusters, which are to be a part of VXLAN wires as
shown in the screen-shots below.