"Using HP ProLiant Network Teaming Software with Microsoft® Windows® Server 2008 Hyper-V or with Microsoft® Windows® Server 2008 Hyper-V R2" HOWTO, 4th edition

VLANs with Hyper-V

Hyper-V supports VLANs. To enable this functionality, complete the following steps:

1. Install and enable Hyper-V in the operating system, and then install the NCU.

2. Open the NCU. In the Team Properties window, configure the NIC team(s). Note that Jumbo

Frames are supported for Windows® Server 2008 R2 Hyper-V but not for Microsoft® Windows®

Server 2008 Hyper-V.

3. Highlight VLAN Promiscuous and click Enabled as shown below.

4. Within server manager, open virtual network manager and select the team name created in steps

2 and 3.

5. Under settings, find the team and create a new virtual network.