"Using HP ProLiant Network Teaming Software with Microsoft® Windows® Server 2008 Hyper-V or with Microsoft® Windows® Server 2008 Hyper-V R2" HOWTO, 4th edition

ManualsBrandsHP ManualsSoftwareHP Matrix Operating Environment w/Insight Control 24x7 Supp Flexible Lic

1

2

3

4

5

6

7

8

9

4

6. After the system reboots, no instances of a teamed device should appear in the Network Control

panel. No references to the HP Network Configuration Utility should appear on the property sheet

(shown below).

7. If Hyper-V has been installed on the system, uninstall it now.

After removing the HP Network Configuration Utility and Hyper-V from the system, begin the

re-installation. Install and enable Hyper-V first; then install the HP Network Configuration Utility.