HP Capacity Advisor 7.2 User Guide

Command warning messages
Within the messages sections, messages appear in alphabetical order. Messages that start with
system_name are placed at “s” in a list.
These messages alert you to specific conditions present in the user interface . Follow-up actions
may or may not be necessary.
For additional information, refer to “Command reference” (page 193) in this guide, as well as the
HP Systems Insight Manager Technical Reference Guide available at http://h18013.www1.hp.com/
products/servers/management/hpsim/infolibrary.html.
Table 28 Warning messages in Capacity Advisor
To correctProbable causeMessage
Check for advisements and take
corrective action if desired.
Appears at the end of output if any
warnings were issued.
One warning issued
or
n warnings issued
Overlapping samples are automatically
ignored or invalidated in Capacity
Advisor. Import the data again, taking
care to designate date ranges that do
not overlap.
Samples imported with
capprofile that overlap in time
cannot be interpreted.
A series of overlapping samples begins
at time sample_time. The overlapping
samples starting at this time are ignored.
The improperly formatted values will be
automatically marked as invalid, and
will not be included in Capacity Advisor
reports.
Some formatting errors can be manually
corrected. See the capprofile(1M)
command reference page for format
examples.
Use a profile viewer to determine if the
sample contains a sufficient number of
valid data points to provide a
meaningful report.
A sample line in the file imported
with capprofile contains values
that are improperly formatted.
Improperly formatted sample values at
time sample_time have been ignored.
See “Out-of-memory errors in the Java
heap” (page 167).
See “Out-of-memory errors in the
Java heap” (page 167).
Java Heap Space. Please see the HP
Capacity Advisor User's Guide for more
information on this issue and possible
solutions.
The missing samples will be
automatically marked as invalid and
will not be included in Capacity Advisor
reports. Use a profile viewer to
determine if the sample contains a
sufficient number of valid data points
to provide a meaningful report.
Samples imported with
capprofile are missing for one
or more sample intervals.
Missing sample for one time interval at
time sample_time.
or
Missing samples for n time intervals at
time sample_time.
The negative samples will be
automatically marked as invalid and
will not be included in Capacity Advisor
reports. Use a profile viewer to
determine if the sample contains a
sufficient number of valid data points
to provide a meaningful report.
A sample imported with
capprofile contained a
negative value for the value of a
metric.
Negative sample value at time
sample_time has been ignored.
Ensure that the CMS has access to
WBEM. Run vseassist to
troubleshoot connection errors.
CMS access to WBEM, using
Bastille, ipf, or other means, has
been shut down.
No systems are available from HP SIM in
the “HPVSE” collection.
174 Capacity Advisor error and warning messages