HP Insight Orchestration 6.3 User Guide

c. In the Job Properties window, make sure that the modified Erase ProLiant Hardware job
displays, then click OK to close the window.
Configuring Ignite-UX
Insight Orchestration supports Ignite-UX version C.7.11.439 (HP-UX 11.31 1009) or later for
HP-UX 11iv3 deployment. (HP-UX 11iv3 0709 or later is required for Integrity VM.)
The Ignite server must have NFS configured as well as the tftp and bootps services enabled in
/etc/inetd.conf.
a. To setup NFS and export the directories Ignite needs, run:
/opt/ignite/lbin/setup_server –n
b. To enable tftp and bootps services, edit /etc/inetd/conf, and uncomment the "tftp" and
"bootps" lines and then run:
inetd –c
Depending on the client being installed (for example, if the client has a graphics card or keyboard
attached), you may be prompted to identify the keyboard language. To avoid this, edit /var/
opt/ignite/config.local by adding the following line:
kdblang="PS2_DIN_US_English"
Configuring deployment servers 23