HP Insight Virtualization Manager 6.3 Software with Logical Server Management User Guide

Table 18 LSMUTIL options (continued)
DescriptionParametersOption
Prints a short list to sysout in ascii format for all, vm, vc, and
oowf managed resources.
If the -xml parameter is supplied, a long list of managed
resources in xml form are listed.
The following list defines the managed resource parameters:
• The vm parameter—Virtual Machine based managed
resources.
• The vc parameter—Virtual Connect based managed
resources
• The oowf parameter—Operations Orchestration workflow
based managed resources.
The parameter [names] can be the names of managed resources
in a comma separated list.
-cr [-vm | -vc | -oowf] [-xml] [-names
names] [-file filename]
-list
Prints a short list to sysout in ascii format for all, active or
inactive logical servers.
If the -details parameter is supplied, a more detailed list of
logical servers is displayed. This listing is best used in
conjunction with the names parameter to locate the details of
one particular logical server.
If the -xml parameter is supplied, a long list of logical servers
in xml form are listed.
The parameter [names] can be the names of logical servers in
a comma separated list.
-ls [-active | -inactive]-[details] [-xml]
[-names names] [-file filename]
Prints a short list in ascii format for all available, vm, vc, or
oowf storage pool entries. If the -xml parameter is supplied,
a long list of storage pool entries in xml form will be sent to
sysout. The following list shows what is displayed for each
parameter:
• The available parameter—Available storage pool entries
are listed.
• The vm parameter—Virtual Machine based storage pool
entries are listed.
• The vc parameter—Virtual Connect based storage pool
entries are listed.
• The oowf parameter—Operations Orchestration workflow
based storage pool entries are listed.
If the -details parameter is supplied, a detailed list of Storage
Pool Entries is displayed. This listing is best used in conjunction
with the names parameter to locate the details of a particular
SPE.
The parameter [names] can be the names of storage pool entries
in a comma separated list.
-spe [-available | -vm | -vc | -oowf]
[-details] [-xml] [-names names][-file
filename]
Prints a short list in ascii format for WWNs starting with a
specified WWN (required). The following list describes the
parameters:
• Range—specifies the number of WWNs to be queried
• LSM—returns only the WWNs owned by "LSA" or "LSARES"
• FREE—returns only WWNs with a status of "FREE”
-wwn -startWWN wwn [-range n]
[-lsm] [-free] [-file filename]
LSMUTIL options 95