HP Integrity Virtual Server Manager 6.3 User Guide
• Base Memory Size and Float Memory Size to modify the memory configurations for a selected
vPar.
• vPar CPU Count to modify the virtual CPU count for a selected vPar.
• vPar LAN Settings to modify VLAN assignments of virtual switch ports connected to the target
vPar.
• Add/Modify Virtual iLO Remote Console to modify the IP Address and Net mask details of
virtual iLO remote console of a vPar. If the vPar does not have a virtual iLO associated with
it, you can create the virtual iLO remote console from the Add/Modify Virtual iLO Remote
Console screen. For more information, see the Add/Modify Virtual iLO Remote Console help
topic.
• Add Storage Device to vPar to add a virtual storage device to selected vPar, where the virtual
storage device is backed by physical storage and connected to a virtual storage adapter on
the VSP.
• Add Network Device to vPar to add network devices and vswitches for vPars.
NOTE: Any storage devices that you add are not functional on the vPar until the vPar is
started or restarted. When you add a storage device to a started vPar, it might not appear
on a Storage tab until the vPar is stopped or restarted. If you add the device to a stopped
vPar, the tab displays the device immediately.
• Add DIO to add DIOs to a VM or vPar. For more information, see “Adding DIOs” (page 111).
• Replace DIO H/W path to replace the h/w path of a DIO owned by a guest, VM or vPar. For
more information, see “Replacing DIO H/W path” (page 111).
• Replace DIO MAC address to replace the MAC address of DIOs owned by a guest, VM or
vPar. For more information, see “Replacing DIO MAC address” (page 112).
• WBEM Credentials to set or change WBEM credentials for vPars.
NOTE: This menu is available only when using Virtual Server Manager with HP SMH.
Modify Vpar to VM Type
When you convert a vPar to a VM type, its CPU entitlement is set to 10%. Also, boot attribute is
set to Manual and resources reserved is set to False. Other configuration settings or attributes are
not modified.
To convert a vPar to a VM type:
1. Select a checkbox for a guest of type vPar.
Figure 81 Modify Vpar to Shared VM Type — Step 1
2. From the Modify menu, select Guest Type.
Working with vPars 117