Insight Managed System Setup Wizard 6.
© Copyright 2009–2010 Hewlett-Packard Development Company, L.P. Confidential computer software. Valid license from HP required for possession, use or copying. Consistent with FAR 12.211 and 12.212, Commercial Computer Software, Computer Software Documentation, and Technical Data for Commercial Items are licensed to the U.S. Government under vendor's standard commercial license. The information contained herein is subject to change without notice.
Table of Contents 1 Overview.........................................................................................................................5 Before running the managed system setup wizard................................................................................5 2 Using Insight managed system setup wizard...............................................................7 Starting Insight managed system setup wizard................................................................................
1 Overview Insight managed system setup wizard configures systems to enable them to be managed by HP Systems Insight Manager software (HP SIM) and its plug-in applications. The managed system setup wizard eases configuration of systems for many HP Insight software products and features. It is especially useful for configuration of Insight Dynamics, but can also be used to configure Insight Control and HP SIM features as well.
2 Using Insight managed system setup wizard You can use the managed system setup wizard for analyzing systems and for configuring systems to be managed by HP SIM and its plug-in applications. After selecting systems to be managed, you configure management features for the target systems. NOTE: Using the Insight managed system setup wizard requires the System Setup toolbox authorization in HP SIM. Authorize the System Setup toolbox on the CMS to allow use of the managed system setup wizard.
Select managed systems If you have not selected valid target systems, the wizard prompts you to do so using the Select Target Systems and Verify Target Systems screens in HP SIM. Each system must be fully discovered and have valid credentials stored within HP SIM. • Select and configure management features You configure management features for the selected systems with the following steps in the managed system setup wizard.
Insight managed system setup wizard uses the HP SIM License Manager database to determine product licensing status. The wizard will store any licensing changes in the License Manager database later, when configuring target systems following the Summary page of the wizard. NOTE: No licensing changes occur during the Select Licenses step of the wizard. Licenses are applied and consumed after you click Run Now on the Summary page.
3 Errors, warnings, and status messages Insight managed system setup wizard provides error checking, warnings, and status messages throughout the steps of the wizard. • The Select Features page checks the requirements of the features you have selected for the target systems. If necessary the wizard selects additional features or systems to meet all dependencies for the selected features on the target systems.
4 Installing Insight managed system setup wizard Insight managed system setup wizard is selected by default to be installed when installing HP Insight Control suite. When installing Insight Dynamics the managed system setup wizard also is selected and cannot be deselected. Insight managed system setup wizard can be optionally selected when installing HP SIM.
5 Support and other resources Contacting HP Information to collect before contacting HP Be sure to have the following information available before you call contact HP: • Software product name • Hardware product model number • Operating system type and version • Applicable error message • Third-party hardware or software • Technical support registration number (if applicable) How to contact HP technical support Use the following methods to contact HP technical support: • In the United States, see the Custom